How To Uninstall Package?

Uninstall a Snap package

  1. To see a list of installed Snap packages on your system, execute the following command in terminal. $ snap list.
  2. After you’ve obtained the exact name of the package you wish to remove, use the following command to uninstall it. $ sudo snap remove package-name.

Description. Removes installed packages/bundles and updates index information as necessary.

How do I uninstall a package from a specific folder?

npm uninstall -S npm uninstall -D . If the package is installed globally, you need to add the -g / –global flag: npm uninstall -g . for example: npm uninstall -g webpack. and you can run this command from anywhere you want on your system because the folder where you currently are does not matter.

What is the use of uninstall-package?

Specifies the minimum allowed package version that you want to uninstall. If you don’t add this parameter, Uninstall-Package uninstalls the package’s newest version that satisfies any version specified by the MaximumVersion parameter. Specifies one or more package names. Multiple package names must be separated by commas.

How to uninstall a package installed with pip install?

To uninstall a package installed with pip install you can use pip uninstall. For example, to uninstall the beautifulsoup4 package you can use the following command: pip uninstall beautifulsoup4. Once you run the command, pip will ask you to confirm the action.

How do I remove a package from npm?

To remove a package from the dependencies in package.json, use the –save flag. Include the scope if the package is scoped. To confirm that npm uninstall worked correctly, check that the node_modules directory no longer contains a directory for the uninstalled package (s).

How do I uninstall a Windows package?

Example 1: Uninstall a package

The Uninstall-Package cmdlet uninstalls packages. The Name parameter specifies the package to uninstall. If multiple versions of a package are installed, the newest version is uninstalled.

How do I uninstall a package in R?

Go to the Packages in right bottom corner of Rstudio, sear the package name and click on the adjacent X icon to remove it.

How do I uninstall a NPM package?

Uninstalling npm packages with `npm uninstall`

  1. npm uninstall from the project root folder (the folder that contains the node_modules folder).
  2. npm uninstall -D If the package is installed globally, you need to add the -g / –global flag:
  3. npm uninstall -g for example:

How do I uninstall apt-get package?

Uninstalling Packages With Apt

  1. Using apt remove. To remove a package using ‘remove’ simply type : $ sudo apt remove
  2. Using apt purge. We can very easily remove packages with the ‘purge’ command as such : $ sudo apt purge

How do I remove recently installed packages from Windows 10?

In the Windows Recovery Options menu, click Troubleshoot, and then click Advanced Options. Click Uninstall Updates. This option removes recently installed quality or feature updates. You’re asked to choose the type of update you want to uninstall.

How do I uninstall a built-in app in Windows 10?

How to Delete a Specific Built-in Windows 10 App with PowerShell

  1. Open PowerShell. Press “Windows + X” and click “Windows PowerShell (Run as Admin)”.
  2. Remove the app. You can remove Windows 10 bloatware with the following command (example): Get-AppxPackage *soundrecorder* | Remove-AppxPackage.

How do I uninstall R and RStudio?

Show activity on this post.

  1. Run.libPaths() and save the two directories shown on the console.
  2. Uninstall R and RStudio from Windows ‘Programs and Features’ menu.
  3. Delete everything in folders that was shown after running.
  4. Delete everything in c:\Users\%USERNAME%\AppData\Local\RStudio-Desktop\
  5. Install R and after Rstudio.

How do I manually install a package in R?

Go into R, click on Packages (at the top of the R console), then click on ‘Install package(s) from local zip files’, then find the zip file with arm from wherever you just saved it. Do the same thing to install each of the other packages you want to install.

How do I Unimport a package in R?

Just go to OUTPUT window, then click on Packages icon (it is located between Plot and Help icons). Remove ‘tick / check mark’ from the package you wanted be unload. Highly active question.

How do I uninstall a package in Ubuntu?

  1. Remove a package: Get the package complete name: dpkg –list | grep partial_package_name* Remove the package: sudo apt-get remove package_name. Remove all the dependencies: sudo apt-get purge package_name.
  2. Remove a Snap: Using remove command: sudo snap remove package_name. answered Aug 9, 2021 at 12:49. Mostafa Wael.

How do you remove yarn from a package?

yarn remove

Running yarn remove foo will remove the package named foo from your direct dependencies updating your package. json and yarn. lock files in the process. Other developers working on the project can run yarn install to sync their own node_modules directories with the updated set of dependencies.

How do you remove a package with yarn?

If you want to remove a package using Yarn should you: run yarn remove

What is the difference between apt and apt-get?

apt-get may be considered as lower-level and ‘back-end’, and support other APT-based tools. apt is designed for end-users (human) and its output may be changed between versions. Note from apt(8): The `apt` command is meant to be pleasant for end users and does not need to be backward compatible like apt-get(8).

What is sudo apt-get clean?

The apt-get autoclean option, like apt-get clean, clears the local repository of retrieved package files, but it only removes files that can no longer be downloaded and are virtually useless. It helps to keep your cache from growing too large.

How do I completely uninstall Linux?

To remove Linux from your computer and install Windows: Remove native, swap, and boot partitions used by Linux: Start your computer with the Linux setup floppy disk, type fdisk at the command prompt, and then press ENTER. NOTE: For help using the Fdisk tool, type m at the command prompt, and then press ENTER.

How to install a package manually?

  • Prerequisites. Visual Studio 2019 with the.NET Desktop Development workload.
  • Create a project. NuGet packages can be installed into any.NET project,provided that the package supports the same target framework as the project.
  • Add the Newtonsoft.Json NuGet package.
  • Use the Newtonsoft.Json API in the app.
  • How to install packages offline?

    With apt-offline tool, you can leverage on your online PC at work or at a friend’s place, to download the required packages and later take and install them in your offline Debian system at home. Apt-offline is a free and open source tool built in python. 1. Install your Debian System at home with apt-offline This requires an internet connection.

    How to uninstall a package with Pip?

  • Open a command or terminal window
  • cd into the project directory
  • pipenv uninstall –all
  • Uninstall-Package (PackageManagement) – PowerShell

    Continue to the main content This browser is no longer supported by the manufacturer. You may benefit from the newest features, security updates, and technical support by switching to Microsoft Edge from Internet Explorer. Reference

    Jump straight to the meat of the article Because of the discontinuation of support for this browser, Upgrade to Microsoft Edge to take advantage of the most up-to-date features, security updates, and technical support available anywhere. Reference

    In this article

    Syntax

    Uninstall-Package Install-Package >] Uninstall-Package Uninstall-Package Uninstall-Package Uninstall-Package Uninstall-Package Uninstall-Package Uninstall-Package

    Description

    In this cmdlet, one or more software packages are removed from the local machine using the Uninstall-Package cmdlet. The Get-Package cmdlet may be used to find out which packages have been installed.

    Examples

    Example 1: Uninstall a package

    The Uninstall-Package cmdlet is responsible for uninstalling packages. The package to be uninstalled is specified by the Name argument. It is removed the most recent version of a package if there are several versions of the package installed. The command: PS> Uninstall-Package -Name NuGet.Core

    Example 2: Use the pipeline to uninstall a package

    Get-Package locates a specific package and passes the SoftwareIdentity object to the Uninstall-Package cmdlet, which then removes the package from the system.NuGet.Core 2.14.0 is required, thus use Get-Package -Name NuGet.Core |Uninstall-Package to install it.

    • Specifying a package using the Get-Package cmdlet is accomplished through the use of the Name and RequiredVersion arguments.
    • In the pipeline, a SoftwareIdentity object is delivered down the line.
    • InputObject is sent to the Uninstall-Package cmdlet, which removes the package after receiving it as an InputObject.
    • Instead, the Uninstall-Package cmdlet can give the following value for the InputObject parameter: Uninstall-Package -InputObject is a command that uninstalls a package (Get-Package -Name NuGet.Core -RequiredVersion 2.14.0)

    Parameters

    This command overrides any warning messages that may appear when two commands are in conflict. Existing commands with the same name as the ones that are being installed are overwritten.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Allows for the uninstallation of packages that have been designated as prerelease.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    This parameter specifies that the package will be uninstalled in its entirety by this cmdlet.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Before invoking the cmdlet, you will be prompted for confirmation.

    Type: SwitchParameter
    Aliases: cf
    Position: Named
    Default value: False
    Accept pipeline input: False
    Accept wildcard characters: False

    This parameter specifies a string with the path of the input object.

    Type: String
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Select the option to remove the version number from the folder path.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Change the setting to omit the version number from the folder path..

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    PackageManagement will be forced to automatically install the package provider for the given package if this option is selected.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Accepts pipeline input that specifies the SoftwareIdentity object for the package returned by the Get-Package cmdlet as a parameter. The SoftwareIdentity object can be sent to InputObject as a Get-Package value or as a variable containing the object.

    Type: Microsoft.PackageManagement.Packaging.SoftwareIdentity
    Position:
    Default value: None
    Accept pipeline input: True
    Accept wildcard characters: False

    Uninstall-Package uninstalls updates, as indicated by the asterisk.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    In this field, you may choose the maximum permitted software version that you want to remove. Without specifying this argument, Uninstall-Package uninstalls the package’s most recent version, which is the default.

    Type: String
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    This parameter specifies the smallest permitted package version that you wish to remove. Otherwise, Uninstall-Package uninstalls the package’s most recent version that meets any of the requirements indicated by the MaximumVersion argument if this parameter is not supplied.

    Type: String
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    This parameter specifies the names of one or more packages. Separate several package names with commas to avoid confusion.

    Type: String
    Position:
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    NoPathUpdate is solely applicable to the Install-Script cmdlet and nothing else. This parameter was created by the supplier and isn’t supported by Uninstall-Package because it’s a dynamic parameter.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    The packagemanagementprovider specifies which packagemanagement provider should be used.

    Type: String
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    The names of one or more package providers are specified in order to search for packages. By using the Get-PackageProvider cmdlet, you may obtain the names of the package providers.

    Type: String
    Aliases: Provider
    Accepted values: Bootstrap, NuGet, PowerShellGet
    Position: Named
    Default value: None
    Accept pipeline input: True
    Accept wildcard characters: False

    Specification of the specific permitted version of the software that you wish to remove. Otherwise, Uninstall-Package uninstalls the package’s most recent version that meets any of the requirements indicated by the MaximumVersion argument if this parameter is not supplied.

    Type: String
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False
    • This parameter specifies the scope for which the software should be uninstalled. The following are examples of acceptable values for this parameter: User currently logged in
    • All users
    Type: String
    Accepted values: CurrentUser, AllUsers
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Removes program dependencies without removing them first.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    Allows you to obtain a package version that is newer than the one already installed on your system. Examples include an installed package that is digitally signed by a trustworthy publisher, but an updated package that is not digitally signed by the same trusted publisher.

    Type: SwitchParameter
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False
    • This parameter specifies whether to look for packages that include a module, a script, or both. The following are examples of acceptable values for this parameter: Modules
    • scripts
    • and so forth.
    Type: String
    Accepted values: Module, Script, All
    Position: Named
    Default value: None
    Accept pipeline input: False
    Accept wildcard characters: False

    This example illustrates what would happen if the Uninstall-Package cmdlet was used. The cmdlet is not executed.

    Type: SwitchParameter
    Aliases: wi
    Position: Named
    Default value: False
    Accept pipeline input: False
    Accept wildcard characters: False

    Inputs

    SoftwareIdentity Uninstall-Package receives SoftwareIdentity objects from the pipeline as input and performs the necessary uninstallation.

    Outputs

    In this case, SoftwareIdentity Uninstall-Package provides a SoftwareIdentity object for each package that was uninstalled by using the command.

    Notes

    • When a command has a package provider, the cmdlet can access dynamic parameters as a result of the command. Dynamic parameters are parameters that are unique to a package supplier. The Get-Help cmdlet displays a list of the parameter sets associated with a cmdlet, which includes the provider’s parameter set. Uninstall-Package, for example, has the PowerShellGet parameter set, which contains the options -NoPathUpdate, AllowClobber, and SkipPublisherCheck. about PackageManagement
    • about PackageManagement
    • Find-Package
    • Get-Package
    • Install-Package
    • Save-Package
    • Find-Package
    • Get-Package

    Feedback

    Feedback may be sent and viewed for

    Pip Uninstall

    The following instructions will teach you how to remove a pip package that you installed using the pip install command line tool.Python Package Index (pip) is a package management tool that may be used to install and manage Python-based software packages that are available for download through the Python Package Index (PyPI).Python Installs Packages″ or ″Pip Installs Python″ are both possible meanings of the recursive abbreviation ″Pip Installs Packages.″ Pip is an abbreviation for ″preferred installation program,″ which is another option.

    • See how you can use pip to uninstall packages in the next section.
    • In the event that you followed one of our earlier instructions on how to install and use pip on Ubuntu 16.04 or how to install and use pip on CentOS 7 and you ended up installing any Python packages that you don’t want to use anymore, you can quickly remove them using the pip command.

    1. Pip List Installed

    To begin, establish a secure connection to your Linux server using SSH.Then, using the following command, display a list of the packages that are presently installed: pip list is an abbreviation for ″pip list.″ The output from the command above will look something like the one shown below: authorize the pip list (0.1.0) backports.ssl-match-hostname is a backports.ssl-match-hostname (3.5.0.1) beautifulsoup4 (4.6.0), bs4 (0.0.1), chardet (3.0.4), and decorator (3.4.0) are all excellent choices.

    2. Pip Uninstall

    All these packages are currently installed via pip and you can uninstall any package that you don’t need. To uninstall a package installed with pip install you can use pip uninstall. For example, to uninstall the beautifulsoup4 package you can use the following command: pip uninstall beautifulsoup4 Once you run the command, pip will ask you to confirm the action. Answer with y to confirm and the package will be uninstalled from the system. pip uninstall beautifulsoup4 Uninstalling beautifulsoup4-4.6.0: . Proceed (y/n)? y Successfully uninstalled beautifulsoup4-4.6.0 As you can see, using pip to uninstall packages is as simple as installing them. Learning how you can manage the packages installed on your server with pip will help you to build better applications. pip is also useful for many other tasks, like updating a package that is currently installed, or installing a specific version of the package you need for the project. For a full list of options you can use with pip, you can use pip -help pip -help Usage: pip Commands: installInstall packages. downloadDownload packages. uninstallUninstall packages. freezeOutput installed packages in requirements format. listList installed packages. showShow information about installed packages. checkVerify installed packages have compatible dependencies. searchSearch PyPI for packages. wheelBuild wheels from your requirements. hashCompute hashes of package archives. completionA helper command used for command completion. helpShow help for commands. General Options: -h, -helpShow help. -isolatedRun pip in an isolated mode, ignoring environment variables and user configuration. -v, -verboseGive more output. Option is additive, and can be used up to 3 times. -V, -versionShow version and exit. -q, -quietGive less output. Option is additive, and can be used up to 3 times (corresponding to WARNING, ERROR, and CRITICAL logging levels). -logPath to a verbose appending log. -proxySpecify a proxy in the form proxy.server:port. -retries Maximum number of retries each connection should attempt (default 5 times). -timeoutSet the socket timeout (default 15 seconds). -exists-actionDefault action when a path already exists: (s)witch, (i)gnore, (w)ipe, (b)ackup, (a)bort. -trusted-host Mark this host as trusted, even though it does not have valid or any HTTPS. -certPath to alternate CA bundle. -client-certPath to SSL client certificate, a single file containing the private key and the certificate in PEM format. -cache-dir

    Store the cache data in . -no-cache-dirDisable the cache. -disable-pip-version-check periodically check PyPI to determine whether a new version of pip is available for download. Implied with -no-index.

    3. Pip Uninstall All

    The quickest and most straightforward method of removing all pip-installed packages is to use the following command: pip uninstall -y -r /usr/bin/pip (pip freeze)

    4. Create a Bash Alias

    We recommend that you establish a bash alias for his command, which is: PIP uninstall -y -r (PIP freeze) is defined as pipuninstallall in the alias pipuninstallall. Then all you have to do is run pipuninstallall to complete the process.

    5. Alternative Solution for pipenv

    If you are using pipenv, you may simply perform the following command: pipenv uninstall -all.Pip documentation for pip uninstall and more use examples are available if you want to learn more about how to use the pip uninstall command.Of course, if you are using one of our Managed Linux VPS Hosting services, you will not be required to utilize pip uninstall to remove installed programs; instead, you can just request that our skilled Linux administrators uninstall the packages using pip.

    • They are accessible 24 hours a day, seven days a week and will respond to your request as soon as possible.
    • Thanks for reading this post on how to remove a pip package.
    • If you found it useful, please share it with your friends using the social media links on the left or just leave a comment below.
    • Thanks.

    Uninstalling packages and dependencies

    Whenever you are no longer need to utilize a package in your code, we recommend that you uninstall it and remove it from the dependencies of your project.

    Uninstalling local packages

    Removing a local package from your node_modules directory

    The uninstall command may be used to remove a package from your node modules directory using the command line interface. If the package has a scope, make sure to include it.

    Unscoped package

    npm uninstall

    Scoped package

    npm uninstall <@scope/package_name>

    Example

    Removing a local package from the package.json dependencies

    Using the uninstall command on the command line, you may delete a package from your node modules directory. If the package has a scope, make sure to include that information in your package.

    Unscoped package

    npm uninstall -save

    Scoped package

    npm uninstall -save <@scope/package_name>

    Example

    Npm uninstall -save lodash npm install -save lodash Note: If you installed a package as a ″devDependency″ (i.e., with -save-dev), you may remove it by using the same -save-dev option: npm uninstall -save-dev package name npm install package name

    Confirming local package uninstallation

    • Check that the node modules directory no longer contains a directory for the package that was successfully uninstalled to ensure that npm uninstall was a successful operation (s). Unix-based operating system (such as OSX): ls node modules
    • Windows systems: dir node modules
    • Linux systems: dir node modules

    Uninstalling global packages

    Uninstall an unscoped global package from the command line by using the -g parameter in conjunction with the uninstall command. If the package has a scope, make sure to include it.

    Unscoped package

    npm uninstall -g

    Scoped package

    npm uninstall -g <@scope/package_name>

    Example

    On the command line, use the uninstall command with the -g parameter to uninstall a global package that has not been scoped. If the package has a scope, make sure to include that information in your package.

    Resources

    Uninstalling local packages

    npm Uninstall – How to Remove a Package

    Working with packages is made easier by the Node Package Manager (NPM), which provides a variety of commands.Additionally, you may remove a package from the npm library in the same way that you would install it.To uninstall a package, you may use the npm uninstall command, which is supplied by the npm package management system.

    • However, the method by which you remove an ordinary package or dependence is not the method by which you should uninstall a global package and a development dependent.
    • In this post, I’ll teach you how to remove an ordinary package, a global package, and a development dependency all in the same session.

    How to Remove a Package with npm Uninstall

    To uninstall a package using the npm uninstall command, use the following syntax in the directory where the package is located: npm uninstall package-name npm uninstall package-name This tutorial will demonstrate how to uninstall a package using the Express framework, which is based on the NodeJS programming language.In the package.json file, you can see that Express is listed as a dependent, as seen in the picture below.However, once I run npm uninstall express, you will no longer see Express mentioned as a dependent: As you can see, there is no longer an Express dependence.

    • There is even no longer a dependence key since there is no longer a dependency.

    How to Remove a Dev Dependency with npm Uninstall

    To uninstall a package using the npm uninstall command, use the following syntax in the directory where the package is located: npm uninstall package-name npm install package-name Express is a NodeJS framework, and it will be used to explain how a package is removed in this article.Express is specified as a requirement in the package.json file, as you can see in the picture below.Express will no longer be mentioned as a dependent once I run npm uninstall express: As you can see, there is no longer an Express dependence.

    • Due to the lack of reliance, there is even no dependency key anymore.

    How to Remove a Global Package with npm Uninstall

    Unlike other packages, a global package is one that is installed worldwide on your computer, meaning that you do not have to reinstall it every time you need to use it.Remove a global package by using the -g parameter to the npm uninstall command and then specifying the package’s name in the command line argument.To do this, use the npm uninstall -g package-name command as the basis of your command.

    • I’ll use the CORS package to demonstrate how to uninstall a global package in order to save time (Cross-origin Resource Sharing).
    • CORS prevents browsers from implementing the Same Origin Policy (SOP), allowing you to send requests from one browser to another.
    • In the screenshot below, you can see that the CORS package is not mentioned as a component of the package.
    • The json file is as follows: This is due to the fact that CORS is installed globally on my system, rather than in the directory of a specific project.
    • If you’ve installed a package globally and want to check what you’ve installed, use npm list -g.
    • You can see that CORS is now labeled as a global package, which is a good thing.

    I’ll now execute npm uninstall -g cors to remove CORS from the system as a whole.When I run npm list –g, I can see that there is no longer any CORS, which indicates that the command was successful.

    Conclusion

    In this post, you learnt about the various methods for uninstalling different types of NPM packages, which will allow you to have better control over your codebase and remove superfluous items.Thank you for taking the time to read this.If you found this article useful, please spread the word so that others can benefit from it as well.

    • Learn how to code for nothing.
    • More than 40,000 people have benefited from freeCodeCamp’s open source curriculum, which has helped them land careers as developers.
    • Get started today.

    How to Uninstall Python Packages

    Uninstalling packages is a fundamental function provided by all Python package management solutions, including pip, pipenv, and the ActiveState Platform, among others.Package managers, on the other hand, will not deal with transitive dependencies unless they are explicitly declared in a requirements.txt or pipfile.lock file (ie., dependencies of dependencies).Using these widely used tools, we will demonstrate how to remove Python programs in this post.

    • We will also provide an introduction to the ActiveState Platform.
    • In terms of automating the installation and uninstallation of transitive dependencies, the AS Platform is unrivaled.
    • This approach allows you to track conflicts between packages, learn about platform-specific dependencies, and even track system-level requirements such as C and C++ libraries using our dependency management system.
    • After you have finished reading, you may test drive the ActiveState Platform by registering for a free trial account.
    • To learn how to remove Python packages using the Pip and Pipenv Package Managers, continue reading this tutorial.

    Checklist

    Before any packages can be removed, it is important to verify that a Python installation has been set up, which contains the necessary files for removing packages. Requirements for Installation (for Windows).

    How to Uninstall Packages Installed with Pip

    To uninstall a package, use the command pip uninstall.

    How to Uninstall Packages in a Python Virtual Environment

    With the help of pip or pipenv, packages may be removed from within a virtual environment. To remove a package locally in a virtual environment, you can use the pip command as follows:

    1. Open a command or terminal window (depending on your operating system) and type the following commands:
    2. Change directory to the project directory
    3. Remove pip from your system

    If you want to remove a package in a virtual environment generated using venv or virtualenv, you may do it with pipenv.

    1. Open a command or terminal window (depending on your operating system) and type the following commands:
    2. Change directory to the project directory
    3. Remove pipenv from the system

    How to Globally Uninstall Python Packages

    In certain circumstances, packages may be installed both locally (for example, for use in a single project) and system-wide (for usage throughout the whole system).A package must be totally deleted from your system once it has been uninstalled locally, and this can only be accomplished by uninstalling the item on a global level.In order to remove a software in Windows on a global scale, follow these steps:

    1. The command window may be opened by typing the word ″command″ (without the quotes) in the Search Box of the Task Bar.
    2. To get Administration (Admin) rights, use Ctrl+Shift+Enter on your keyboard.
    3. Remove pip from your system

    On order to remove a package worldwide in Linux, follow these steps:

    1. Open a terminal window
    2. sudo su pip uninstall

    How to Uninstall Package Dependencies with Pip

    The pip command installs a package together with all of the dependencies that the package relies on throughout the installation process. Unfortunately, when you uninstall a package, pip does not uninstall any dependencies that were installed with it. Uninstalling dependencies can be accomplished using a variety of methods, which are detailed below.

    If a package has been installed using a pip requirements file (e.g., pip install requirements.txt), all of the packages in requirements.txt can be removed using the following command: pip uninstall requirements.txt

    Pip uninstall requirements.txt is a text file that specifies the prerequisites for installing Pip.

    For packages that do not include a requirements.txt file, you may use the pip display command to get a list of all the prerequisites for the package in question:

    The Pip Show As an illustration, pip demonstrate cryptography The output should be something like this: ‘Requires: six, cffi’ The pip uninstall command may then be used to remove the dependencies that were previously installed. However, before deleting any packages, be sure that they are not dependents on any other already-installed packages on your system.

    How to Uninstall Package Dependencies with Pipenv

    Show by pip Show cryptography as an example: pip ‘Requires: six, cffi’ is an example of what should be produced. Following that, the pip uninstall command may be used to remove the dependencies. To make sure, however, that the packages are not dependent on any other current packages, you should check their dependencies before removing.

    1. Pip performs on stage As an illustration, they illustrate cryptography. ‘Requires: six, cffi’ should be displayed as the output. The pip uninstall command may then be used to remove these dependencies from the system. However, before deleting any programs, be sure that they are not dependents on any other already-installed packages.

    How to Uninstall a Package Installed With Setuptools

    • Setuptools was used to configure and install any packages that had been configured and installed before with the following command: installation of python setup.py Unfortunately, there is no uninstall command for the Python setup.py script. To remove a package that was installed using setup.py, run the pip command as follows: remove pip from your computer Remember that there are a few exceptions that cannot be removed with pip, including the following: packages containing distutils, which do not provide information identifying which files have been installed
    • Installed via the setup.py develop command, these script wrappers are used to wrap scripts.

    Next Steps

    It is possible that the process of resolving packages while installing or removing an environment will be exceedingly sluggish (or perhaps entirely manual).The ActiveState Platform, which automatically resolves dependencies for you–and does it quickly–can help you get things done much more quickly.Start using the ActiveState Platform for free now.

    • Alternatively, you may just install Python 3.9 and use the command-line interface that comes with it, the State Tool, to ″state install″ the packages that you require: > install in the state installing the numpy package numpy installation package numpy installation package numpy installation package numpy installation package The Runtime Environment is being updated.
    • It is possible that changes to your runtime will need the rebuilding of some dependencies.
    • There are two new dependents in numpy, for a total of eight new requirements in total.
    • Eight-eighth-inch construction, eight-eighth-inch installation Numpy has been included as a package.

    Uninstalling Packages With Apt Package Manager

    In this module, we will learn how to remove packages from our Debian/Ubuntu systems using the apt package manager.

    Find The Package You Want To Uninstall

    First and foremost, we must locate the package from which we wish to remove its components.With the following, we can quickly and easily identify the actual name of our package: $ dpkg -list |grep ″disabled″ This aids us in locating the specific product that we will require for the subsequent phases in the process.

    • Once we have discovered the package that we are looking for, we may proceed to the following stage.

    Uninstalling Packages With Apt

    • When it comes to removing packages using the apt package manager, we have two options: the first is to use the apt package management’s uninstall command, which is as follows: remove
    • \sPurge

    1. Using apt remove

    To uninstall a package using the’remove’ command, enter the following command: $ sudo apt remove

    2. Using apt purge

    With the ‘purge’ command, we may quickly and efficiently remove packages from our system as follows: $ sudo apt-get remove

    What’s the difference between ‘remove‘ and ‘purge‘?

    So the obvious question is when to use the terms ″remove″ and ″purge,″ and how do you know when to use them?The key difference between’remove’ and ‘purge’ is that’remove’ simply gets rid of the package, leaving any configuration files intact, but ‘purge’ gets rid of the package and all of its configuration files.’purge’, on the other hand, not only removes the package, but it also removes all configuration files that are located outside of the home directory.

    A Fun Little Secret

    Contradictory to their primary use, both ‘purge’ and’remove’ may be used to INSTALL packages, which is somewhat contrary to their primary function. As an example, the following package name might be created by attaching a ‘+’ to the end of it: $ sudo apt-get install

    Post Uninstall Clean Up

    The removal/purging of our package has been completed successfully at this point.As a matter of good practice, we may now execute some commands to clean up once the removal has been completed.We may erase the cache of the old/outdated packages by using the following command: We can uninstall packages that are no longer necessary by using the following command: Finally, any failed or broken installations can be repaired using the following procedure:

    Conclusion

    As a result, we learned how to quickly and efficiently remove packages from a Debian/Ubuntu-based system by utilizing the apt package management system.

    How to Remove Windows 10’s built-in apps/bloatware and restore them

    • Even if there is a single individual who utilizes each of Windows 10’s built-in programs, I suspect that person will be a rarity given the sheer number of them. The operating system comes preloaded with a slew of applications, including Mail, Photos, the out-of-date Skype, the defunct Groove Music, Xbox, and financial management. None of them take up much space on your system, but they do clutter up the App list, so we’re going to teach you how to uninstall them and get rid of the Windows 10 bloatware that came along with the operating system. How to delete applications that are pre-installed on your Windows 10 computer It’s crucial to note, however, that some of these programs are required for the proper operation of the operating system, and there are some that Microsoft considers so critical that you won’t be able to remove them using this approach. If you disable Bing News, for example, you may find that Cortana’s story feature is broken. Uninstall Photos and you’ll be without a viewer until you download a third-party viewer to use in its place. You will not be able to delete built-in Windows 10 features such as Cortana, Edge, or Windows Feedback. On top of that, any programs that you do manage to uninstall will almost certainly reappear when you install a Windows 10 feature update. With a PowerShell script we’ve written, you can easily get rid of bloatware. It can execute (but is not limited to) the following functions: Remove Skype from Windows 10
    • uninstall the Windows Store
    • uninstall the Xbox app
    • uninstall the Mail app
    • uninstall any additional Universal Windows Platform junk from Windows 10

    In the event that you unintentionally destroy something important, we’ll also teach you how to recover built-in programs in Windows 10 after an uninstall, in case that happens. In addition, if you want to completely remove all store applications from your computer, we will teach you how to do it from your hard drive. Let’s get this party started.

    How to Delete a Specific Built-in Windows 10 App with PowerShell

    1. PowerShell should be launched. Press ″Windows + X″ and select ″Windows PowerShell (Run as Administrator)″ from the drop-down menu.
    2. Remove the application from your device.
    3. You may uninstall bloatware from Windows 10 by using the following command (as an example):
    4. Get-AppxPackage *soundrecorder* | Get-AppxPackage *soundrecorder* Remove-AppxPackage
    5. In most cases, the app names are self-explanatory, but there are a few that are not the same as the display titles they have in Windows 10. Here is the whole list: Installing the 3D Builder: Get-AppxPackage *3dbuilder* | Remove-AppxPackage *3dbuilder* Calculator: Get-AppxPackage *windowscalculator* | Remove-AppxPackage Calendar and Mail: Get-AppxPackage *windowscommunicationapps* | Remove-AppxPackage Camera: Get-AppxPackage *windowscamera* | Remove-AppxPackage Calculator: Get-AppxPackage *windowscalculator* | Remove-AppxPackage Calculator: Get-AppxPackage *windowscalculator* | Get Office by using the Get-AppxPackage *officehub* command. Removal of the application package | Remove-AppxPackage Get Skype by using the commands Get-AppxPackage *skypeapp* and Remove-AppxPackage Installing an AppxPackage: Get-AppxPackage *installed* | Remove-AppxPackage Get-AppxPackage *zunemusic* | Remove-AppxPackage Maps: Get-AppxPackage *windowsmaps* | Remove-AppxPackage Groove Music: Get-AppxPackage *zunemusic* | Remove-AppxPackage Microsoft Solitaire Collection: Get-AppxPackage *solitairecollection* | Remove-AppxPackage Money: Get-AppxPackage *bingfinance* | Remove-AppxPackage Microsoft Solitaire Collection: Get-AppxPackage *solitairecollection* | Remove-AppxPackage Entertainment: Get-AppxPackage *zunevideo* | Remove-AppxPackage News: Get-AppxPackage *bingnews* | Remove-AppxPackage Get-AppxPackage *zunevideo* | Remove-AppxPackage Get-AppxPackage *onenote* | Remove-AppxPackage *onenote* | Get-AppxPackage Individuals: Get-AppxPackage *individuals* | Remove-AppxPackage Phone Companion: Get-AppxPackage *windowsphone* | Remove-AppxPackage Photographs: Get-AppxPackage *photos* | Remove-AppxPackage | Get-AppxPackage *windowsstore* | Remove-AppxPackage Store: Get-AppxPackage *windowsstore* | Remove-AppxPackage Get-AppxPackage *bingsports* | Get-AppxPackage *bingsports* | Remove-AppxPackage The following commands will install a voice recorder: Get-AppxPackage *soundrecorder* | Remove-AppxPackage Get-AppxPackage *bingweather* for weather information. Removal of the application package | Remove-AppxPackage | Get-AppxPackage *xboxapp* | Remove-AppxPackage on the Xbox.

    How to Remove All Built-in Windows 10 Apps at Once with PowerShell

    There are some scenarios in which you just want your operating system to be as barebones as possible. The script we’ve written is a PowerShell script that will erase all of them in a single command… Here’s how you can make advantage of it:

    1. Get the script from the link below.
    2. Extract the files from their folders.
    3. Right-click ″uninstall-pre-installed-apps″ in your downloads folder and select ″Extract All″ from the context menu
    4. Make changes to your execution policy.
    5. PowerShell may be launched by pressing ″Ctrl + X″ on your keyboard and selecting the admin variation from the fly-out menu. Then run the following command: Set-ExecutionPolicy RemoteSigned. This will allow you to run PowerShell scripts that are not within the PowerShell environment. In the event that you are asked for an answer, input ″Y″ and click ″Enter″
    6. Execute the script
    7. Enter the command & C:uninstall-pre-installed-apps.ps1 into PowerShell and click ″Enter.″ For the sake of this demonstration, we have copied the script to the root folder of our ″C:″-drive. The command should be modified according to your requirements.

    How to Remove All Installed Store Apps with a PowerShell Command

    Get the script from the link provided.The files should be extracted.Right-click ″uninstall-pre-installed-apps″ in your downloads folder and select ″Extract All″ from the menu that appears.

    • Customize the way your program is executed.
    • PowerShell may be launched by pressing ″Ctrl + X″ on your keyboard and selecting the admin variation from the pop-up menu that appears.
    • Type: Set-ExecutionPolicy RemoteSigned to complete the operation.
    • Using this method, you will be able to run scripts that are not written in PowerShell.
    • To respond, enter ″Y″ and press the ″Enter″ key when requested to do so.
    • Script should be executed.

    Enter the command & C:uninstall-pre-installed-apps.ps1 into PowerShell and press ″Enter″ to execute the script.In this example, we’ve copied the script to the root folder of our ″C:″-drive’s root directory.The command can be modified according to your need.

    1. Run this commandGet-AppxPackage * | Remove-AppxPackage

    How to Reinstall All Pre-installed Windows 10 Apps

    If you lose access to OS functions that you rely on, you may also reinstall all of the default programs.

    1. Use the following command in PowerShell: Invoke-AppxPackage -AllUsers| Foreach
    2. Get-AppxPackage -AllUsers
    3. Wait for it to do its task.
    4. It will take a few minutes for PowerShell to download and install all of your applications. Continue to wait for it to finish before closing PowerShell.

    Using Windows10Debloater to Easily Remove All Built-in Windows 10 Apps

    It is possible to delete or re-install all built-in Windows 10 Apps with one click using Windows10Debloater, which is a script-based solution that includes an optional graphical user interface (GUI).For the most part, it is based on the same PowerShell-based methods as those demonstrated above, which are saved in scripts that may be customized to exclude certain applications that you would wish maintain.

    1. Windows10Debloater may be obtained from the GitHub repository. Then, on the Windows10Debloater project page on Github, click the green ″Code″-button and then ″Download ZIP″ to save Windows10Debloater to your computer’s hard drive.
    2. Windows10Debloater should be extracted.
    3. Right-click ″Windows10Debloater.zip″ and select ″Extract All″ from the drop-down menu.
    4. Start Windows10Debloater and see what happens.
    5. Run the GUI-version of Windows10Debloater by selecting ″Run with PowerShell″ from the context menu of the file ″Windows10DebloaterGUI.ps1.″
    6. Warning for the Cornfirm PowerShell script
    7. Whenever the PowerShell script warning asks for confirmation, select ″Open″ from the drop-down menu.
    8. Windows10Debloater is a tool for removing bloatware from Windows 10.
    9. To get rid of all pre-installed Windows 10 apps, select ″Remove All Bloatware″ from the drop-down menu. PowerShell provides a visual representation of how the script commands are being performed in the PowerShell window.
    10. Reinstall the pre-installed applications in Windows 10.
    11. Windows10Debloater also provides the option to restore all of the pre-installed applications by pressing the ″Revert Registry Changes″ button.
    12. Windows10Debloater has a number of additional features.
    13. You may also use the program to do a variety of additional tasks, such as ″disable Cortana,″ ″uninstall OneDrive,″ ″disable Telemetry,″ and so on.

    How to uninstall R and RStudio with all packages, settings and everything else?

    I have some more concerns about the earlier response. That is why I have expanded the answer to include more phases (which I am now experiencing), which are shown below:

    1. R, RStudio, and RTools may be uninstalled from the Windows ″Programs and Features″ menu.
    2. After the program has finished, delete everything in the directories that were displayed.
    3. The libPaths() function in R is used to determine where R packages are installed. In my situation, it appears as follows: libPaths() 1 ″C:/Users/ percent USERNAME percent /Documents/R/win-library/3.6″ ″C:/Program Files/R/R-3.6.3/library″
    4. libPaths() 1 ″C:/Program Files/R/R-3.6.3/library″

    As a result, I manually deleted the following files and folders (which remained after a complete uninstallation of R, RStudio, and RTools) as well as the following: – C:Users percent USERNAME percent DocumentsR – C:Users percent USERNAME percent Documents.Rhistory – Various files and folders under C:Users percent USERNAME percent AppDataLocal – C:Users percent USERNAME percent Documents.Rhistory – Various files and folders under C:Users percent USERNAME percent Temporary files associated with R and RStudio sessions

    1. Delete everything in the C:Users percent USERNAME percent AppDataLocalRStudio-Desktop directory.
    2. Make a complete deletion of everything in the C:Users% USERNAME% rstudio directory.
    • After that, you may proceed to the re-installation section for R (after the advised Windows reboot), as seen below. Please follow the following order: R for Windows and RStudio Desktop are available for download. (If necessary, you may also download RTools.) Install the R programming language.
    • Obtain and install RTools (if necessary)
    • Install RStudio on your computer.

    How to unload a package without restarting R

    However many times you try to uninstall a package (and all of the dependencies it brought in with it) by using unloadNamespace(), the memory footprint will remain.In addition to this, detach(″package:,packageName″, unload=TRUE, force=TRUE) will not function either.With the pryr package, you may verify RAM with a fresh new console or by selecting Session > Restart R from the main menu: pryr:mem used() consumes 40.6 MB of memory.

    • This will, of course, be dependent on whatever packages are loaded (can also fluctuate a bit after the decimal) Verify that my sessionInfo() R version 3.6.1 is correct (2019-07-05) Platform: x86 64-w64-mingw32/x64 x86 64-w64-mingw32/x64 (64-bit) Running on: Windows 10 x64 (64-bit) (build 17763) Product matrix default locales are as follows: LC COLLATE=English Canada.1252LC CTYPE=English Canada.1252LC MONETARY=English Canada.1252 LC NUMERIC=C LC TIME=English Canada.1252 attached base packages are as follows: LC COLLATE=English Canada.1252 attached base packages are as follows: statsgraphicsgrDevices utilsdatasetsmethodsbase statsgraphicsgrDevices utilsdatasetsmethodsbase loaded from a namespace (rather than being attached): stringi 1.4.3codetools 0.2-16 stringr 1.4.0 packrat 0.5.0 compiler 3.6.1pryr 0.1.4magrittr 1.5tools 3.6.1Rcpp 1.0.3stringi 1.4.3codetools 0.2-16 stringr 1.4.0 packrat 0.5.0 Let’s try to load the Seurat package and see what the new memory footprint looks like.
    • library(Seurat) pryr:mem used() used 172 MB of memory.
    • It’s possible that things will alter in the future, but this is simply to give you an idea.
    • To erase everything, let’s utilize the unloadNamespace() function: unloadNamespace(″Seurat″) unloadNamespace(″ape″) unloadNamespace(″cluster″) unloadNamespace(″cowplot″) unloadNamespace(″ROCR″) unloadNamespace(″gplots″) unloadNamespace(″caTools″) unloadNamespace(″bitops″) unloadNamespace(″fitdistrplus″) unloadNamespace(″RColorBrewer″) unloadNamespace(″RColorBrewer″) unloadNamespace (″sctransform″) unloadNamespace(″future.apply″) unloadNamespace(″future.apply″) unloadNamespace(″future.apply″) (″future″) unloadNamespace(″plotly″) unloadNamespace(″ggrepel″) unloadNamespace(″ggridges″) unloadNamespace(″ggplot2″) unloadNamespace(″gridExtra″) unloadNamespace(″gtable″) unloadNamespace(″uwot″) unloadNamespace(″irlba″) unloadNamespace(″leiden″) unloadNamespace(″reticulate″) unloadNamespace(″rsvd″) unloadNamespace(″survival″) unloadNamespace(″Matrix″) unloadNamespace(″nlme″) unloadNamespace(″lmtest″) unloadNamespace(″zoo″) unloadNamespace(″metap″) unloadNamespace(″metap″) unloadNamespace(″metap″) (″lattice″) unloadNamespace(″grid″) unloadNamespace(″httr″) unloadNamespace(″ica″) unloadNamespace(″igraph″) unloadNamespace(″irlba″) unloadNamespace(″KernSmooth″) unloadNamespace(″irlba″) unloadNamespace(″KernSmooth″) unloadNamespace(″KernSmooth″) (″leiden″) unloadNamespace(″MASS″) unloadNamespace(″pbapply″) unloadNamespace(″plotly″) unloadNamespace(″png″) unloadNamespace(″RANN″) unloadNamespace(″RcppAnnoy″) unloadNamespace(″tidyr″) unloadNamespace(″dplyr″) unloadNamespace(″tibble″) unloadNamespace(″RANN″) unloadNamespace(″tidyselect″) unloadNamespace(″purrr″) unloadNamespace(″htmlwidgets″) unloadNamespace(″htmltools″) unloadNamespace(″lifecycle″) unloadNamespace(″pillar″) unloadNamespace(″vctrs″) unloadNamespace(″rlang″) unloadNamespace(″Rtsne″) unloadNamespace(″SDMTools″) unloadNamespace(″Rdpack″) unloadNamespace(″bibtex″) unloadNamespace(″tsne″) unloadNamespace(″backports″) unloadNamespace(″R6″) unloadNamespace(″lazyeval″) unloadNamespace(″scales″) unloadNamespace(″munsell″) unloadNamespace(″colorspace″) unloadNamespace(″npsurv″) unloadNamespace(″compiler″) unloadNamespace(″digest″) unloadNamespace(″R.utils″) unloadNamespace(″pkgconfig″) unloadNamespace(″pkgconfig″) unloadNamespace (″gbRd″) unloadNamespace(″parallel″) unloadNamespace(″gdata″) unloadNamespace(″listenv″) unloadNamespace(″crayon″) unloadNamespace(″splines″) unloadNamespace(″zeallot″) unloadNamespace(″reshape″) unloadNamespace(″glue″) unloadNamespace(″lsei″) unloadNamespace(″RcppParallel″) unloadNamespace(″data.table″) unloadNamespace(″viridisLite″) unloadNamespace(″globals″) Check sessionInfo() once more: Version 3.6.1 of the R programming language (2019-07-05) Platform: x86 64-w64-mingw32/x64 x86 64-w64-mingw32/x64 (64-bit) Running on: Windows 10 x64 (64-bit) (build 17763) Matrix goods are available in the following locales: English Canada.1252LC COLLATE=English Canada.1252LC CTYPE=English Canada.1252LC MONETARY=English Canada.1252 LC NUMERIC=C LC TIME=English Canada.1252 attached base packages: LC COLLATE=English Canada.1252 attached base packages: statsgraphicsgr A namespace was used to load the following devices (which were not attached): utilsdatasetsmethodsbase stringi 1.4.3plyr 1.8.4reshape2 1.4.3codetools 0.2-16 packrat 0.5.0assertthat 0.2.1 tools 3.6.1stringr 1.4.0rstudioapi 0.10pryr 0.1.4jsonlite 1.6 gtools 3.8.1R.oo 1.22.0 magrittr 1.5Rcpp 1.0.3R.methodsS3 1.7.1 stringi 1.4.3plyr 1.8.4re Check the memory footprint by running the following command: pryr:mem used() used 173 MB of memory.
    • Demonstration via screencast is available here.

    What is the difference between apt and apt-get?

    It is possible to install, delete, and manage packages in Debian-based Linux distributions using a variety of programs that communicate with the Advanced Packaging Tool (APT) and interact with it.Apt-get is an example of a command-line utility that is very extensively used and popular.Aptitude is another popular application that offers both graphical user interface and command-line options.

    • As a result of your experience with apt-get commands, you may have encountered a number of comparable commands such as apt-cache, apt-config, and so on.
    • And it is at this point when the difficulty comes.
    • Because these commands are so low level, and they contain so many features that the ordinary Linux user is unlikely to ever use them, they are not recommended.
    • The most widely used package management commands, on the other hand, are spread among three different commands: apt-get, apt-cache, and apt-config.
    • In order to address this issue, the apt commands have been developed.
    • apt contains some of the most extensively used features from apt-get, apt-cache, and apt-config, as well as several esoteric and seldom used features from apt-get, apt-cache, and apt-config.

    With apt, you don’t have to fumble your way from apt-get to apt-cache to apt-config; everything is done in one step.It is more organized and offers you all the solutions you want in order to manage your packages effectively.Briefly stated, apt represents the most frequently used command parameters from apt-get, apt-cache, and apt-config.Earlier last year, I wrote about the differences between apt and apt-get in further depth.

    Cleaning up with apt-get

    Written by Unix Dweeb for Network World |

    Most of us with Debian-based systems use apt-get routinely to install packages and upgrades, but how often do we pull out the cleaning tools? Let’s check out some of the tool’s options for cleaning up after itself.

    It is common practice to run apt-get commands on a Debian-based system.Packets are updated on a fairly regular basis, and tools such as apt-get update and apt-get upgrade make the procedure rather straightforward.On the other side, how frequently do you use the apt-get clean, apt-get autoclean, or apt-get autoremove command lines to clean up after yourself?

    • Following the in

    Leave a Reply

    Your email address will not be published.