Design and determine needed measurements (or use ours) To start,decide where you’ll keep your package drop box.
What are the best extra large parcel drop boxes?
Best Extra Large Parcel Drop Boxes Reviews & Recommendations for 2021 1 Keter Package Delivery Box 2 Box Sentinel 3 RTS Home Accents Premium Horizontal Delivery Box 4 Cosco Outdoor Living BoxGuard 5 Winbest Large Steel Parcel Box
What is the best way to design a drop off box?
One effective design is something similar to a library drop off hatch. A door with a holder swings open, blocking the space below, but allowing for a package to be inserted. When the hatch is closed, the package drops into the protected space.
How to prevent theft with a parcel drop box?
One way to help prevent theft is to use a secure lock box. Here’s how to create a DIY parcel drop box to keep your packages safe. Don’t leave your packages exposed like this! So, what are you trying to accomplish if you decide to build a package drop box? As we see it, there are three main goals: Security.
What is the size of your package drop box?
The size of our package drop box is suited to handle envelopes and several sizes of boxes easily, but if you want your box to allow for even more packages, increase the dimensions in height. Our box was made for a specific spot and measures 23 3/4” wide by 35” tall by 21” deep.
How do package drop boxes work?
Parcel Drop Boxes
A door is opened so your package can be placed in the lock box, and when the door is closed, the package drops into another compartment. Opening the door again will not expose the package stored inside the lockbox.
How can I hide a porch package?
Creative ways to keep your packages safe from porch thieves:
- Use a storage locker.
- Buy a package locker.
- Have packages delivered in a hideaway.
- Send packages to the office.
- Amazon Key.
- Work with your neighbors.
- Have your packages held.
- Request signature confirmation.
How do you make a secure mailbox?
4 Ways To Make Your Mailbox More Secure
- 4 Ways To Make Your Mailbox More Secure.
- Sign Up For Notifications Of Mail Delivery From USPS –
- Get A Locking Mailbox To Increase Security-
- Install A Mailbox Alarm For An Added Sense Of Security –
- Add A Mailbox Security Camera –
How do porch delivery boxes work?
These boxes typically work just like a FedEx, UPS, or U.S. Postal Service drop box, with an opening at the top for couriers to deposit packages that fall into a secure compartment at the bottom. They can even be bolted to your porch or weighed down with sand or weights.
Do package lock boxes work?
Parcel Boxes secure your deliveries better than deterrents like security cameras and alarms, and parcel boxes are also more convenient than delaying deliveries or having them sent to alternative locations for pickup. These lockable boxes tend to be an effective option for those who have space near their doorway.
How do I drop mail in mailbox?
If your packages have domestic shipping labels, you can drop them off at USPS collection locations without waiting in line. If the packages fit, you may drop them off at blue collection mailboxes and Post Office mail drop slots. Some Post Offices may also have a designated spot on the counter for prepaid packages.
How do you send a package to a locker?
- Step 1: Package Delivery. Notify The UPS Store by phone or email that you want your item(s) placed in a locker.
- Step 2: Pickup Notification. We’ll email you a locker code when your package is ready for pickup.
- Step 3: Package Retrieval. Enter your locker access code at the locker screen to pickup your package anytime!
How do I use USPS parcel locker?
A key will be left in the mailbox to be used as a parcel locker key. This key has a tag that indicates the parcel locker that contains the item. Insert the key into the correct parcel locker, and the mail piece can be retrieved. The key will remain in the locker once it is inserted.
How do I make a parcel?
How to package and prepare your parcel for shipping
- Choose the right box. Use a new rigid corrugated double wall cardboard box and choose the right size for the content.
- Pack your items.
- Shipping label.
- Seal the box.
- Place your label safely and visibly.
How do you find a drop box?
“Drop boxes were introduced as an emergency measure during the asking for ballot audits and even at one point asking Raffensperger to “find” him more that 11,000 votes to beat Biden. Both Raffensperger and Georgia Gov. Brian Kemp have maintained
How to make DIY storage boxes?
How big is a drop box?
Our drop box in this size is 10ft. long, 7.5ft. wide and 3.5ft tall, and is used for dirt, rock, concrete and other heavy materials only. 20 Yard Drop Boxes hold 20 cubic yards of junk. Our 20 yard drop box is 16ft. long, 7.5ft. wide and 4.5ft. tall.
The 5 Best Extra Large Parcel Drop Boxes 2022
- Because it’s big, weather resistant, and most importantly – the vast majority of carriers regularly utilize it – the Keter Package Delivery Box is our favorite extra large delivery box (parcel box).
- The majority of thefts are the result of a window of opportunity.
- Parcel boxes provide two levels of protection for your items.
- First and foremost, they are difficult to obtain admission into.
- Yet a second reason is that many porch pirates will not even consider taking your gifts if they do not see them out in the open on your porch.
- In today’s world, the only drawback of delivery boxes is that they are typically rather tiny.
- The majority of individuals only receive a few items at a time, and they only receive little boxes and correspondence.
- If you get a big number of parcels or ones that are very enormous, you’ll need to invest in one of these extra-large parcel drop boxes.
Keter Package Delivery Box
SummaryAn eye-catching box with a lockable storage section inside the lid. Pros: The space is large and appealing, and everything is clearly labeled. Cons: The build is a tad flimsy at times.
Summary: A heavy-duty keycode box composed of aluminum and stainless steel that is both secure and durable. Exceptionally well-secure and built in the United States of America. Cons It has an industrial feel about it.
BEST FOR THE MONEY
RTS Home Accents Parcelwirx
Summary: A basic trunk box that can handle huge parcels is described above. Advantages: A straightforward design with a global appeal. A basic latch is used for security, which is a drawback.
Best Extra Large Parcel Drop Boxes Reviews & Recommendations for 2021
- The Keter Package Delivery Box, Box Sentinel, RTS Home Accents Premium Horizontal Delivery Box, Cosco Outdoor Living BoxGuard, Winbest Large Steel Parcel Box, and the RTS Home Accents Premium Horizontal Delivery Box are all excellent choices.
The Best Overall: Keter Package Delivery Box
- Keter is the source of the image.
- With an appealing, timeless appearance and the ability to receive deliveries without the need of a code or key, the Keter Package Delivery Box is a great choice for package delivery.
- Packages are placed in the upper bin and then dropped into the box, where they will remain secure until a key is used to unlock the box and remove the packages from it.
- In terms of interior measurements, this box is 19.7 inches broad by 25.7 inches deep.
- Despite the fact that it is equipped with a specific bin system, it is built to withstand water and other adverse weather conditions.
- It is especially well-protected as a result of the lock.
- Furthermore, it is not required to have any certain sort of installation.
- It’s just that it works.
- The fact that the Keter Package Delivery Box is both visually appealing and useful is most likely its most appealing feature.
- It is a bit more expensive than some of the alternatives, but it more than makes up for it in terms of aesthetics and usability.
It is simple to use and install. Can accept packages without the need of a code or a key. Water and weather resistance are included.
It is a little more costly than the alternatives.
The Runner up: the Box Sentinel
- Image courtesy of the MB Sentinel This is unquestionably one of the hardest and most serious all-around alternatives available for customers who want to ensure that their shipments are completely safe throughout transit.
- This box, which is made of aluminum and stainless steel, will beat anyone who tries to break through the door.
- In order to get entry, the carrier will have a secret code that you will need to input.
- The only drawback is that it requires a code to be entered, which means you will need to get in touch with your service provider.
- This box, which is large enough to accommodate virtually all parcels received through Amazon, not only protects items from the weather and criminals, but it may also aid in the preservation of food delivery during the summer heat.
- Last but not least, this is a highly advanced product that has been designed to be incredibly resilient.
- You can read the rest of our Box Sentinel review here.
Stainless steel and aluminum are used to construct this big box, which is meant to accommodate Amazon parcels. It is possible to keep food delivery secure.
A specific code is required by the carrier.
Best for the Money: RTS Home Accents Parcelwirx Premium Horizontal Delivery Drop Box
- ParcelWirx is the source of this image.
- When you use the RTS House Accents Premium Horizontal Delivery Box, you can ensure that your products are delivered safely while also adding a distinctive touch of décor to your home.
- Outside, this Horizontal Delivery Box is inconspicuous, yet it has the ability to hold larger products on the inside.
- A hinged lid swings outward and upward, and it may be locked with either a smart lock or a standard lock, depending on the situation.
- The Horizontal Delivery Box is made of durable materials and has a strong finish that makes it resistant to weather and age.
- It is also appealing enough to be mistaken for typical décor.
- Its interior measures 33.5 by 18 by 23.2 inches, which is more than enough space for practically any box to fit within.
- However, there are several disadvantages, the most prominent of which is the fact that someone must know the code or have the key in order to have access to it.
- This is in contrast to other drop box-style devices, which do not require a key or code in order to make actual deliveries.
A straightforward hinged lid that accepts either a smart lock or a standard lock. Made with high-quality materials.
To get entry, a code or key must be used.
The Most Affordable: Cosco Outdoor Living BoxGuard
- A heavy-duty secured box, the Cosco Outdoor BoxGuard is clearly labelled to let delivery professionals know where to place supplies and parcels.
- Source: Cosco Outdoor BoxGuard It’s available in either grey or brown, depending on your preferences, however one minor drawback is that it has a more industrial appearance than some of the other possibilities.
- In addition to the aesthetic appeal provided by the angled roof, it is one of the most cost-effective porch locker alternatives available.
- It comes with a unique hinge that provides enough tension to keep the lid open even when the box is not being used, making it simpler for someone to load big things into it.
- This box may be used to direct anybody who makes deliveries to you to store parcels in it for safety and to keep your things out of the reach of inquisitive eyes.
- And the box doesn’t simply keep out burglars; it also keeps out animals and bad weather.
- This box has a capacity of 6.3 cubic feet, which means it can accommodate many parcels or simply a few days’ worth of mail if you have a propensity to be absent from home.
- All in a small and weather-resistant package, that’s more than 40 gallons of storage capacity.
The storage capacity is over 40 gallons, and the lid is held open by a hinge. Roof with an appealing angled pitch.
As a whole, it’s not as appealing as some of the other possibilities.
The Best Commercial: Winbest Large Steel Parcel Box
- Winbest is the source of this image.
- Are you looking for a business solution to your problem?
- If you’re searching for a heavy-duty solution, the Winbest Large Steel Parcel Box is just what you’ve been looking for.
- It is intended to be the most dependable means of storing huge numbers of packets, albeit it is rather limited in terms of capacity for bigger packages.
- The box’s dimensions are 10.5 by 15.4 by 41.5 inches, which means it’s best suited for big quantities of goods rather than very large ones, as shown by the measurements.
- For those who choose to attach it, mounting hardware is available, and a particular tamper-resistant slot prevents parcels from being taken out after they have been placed in.
- As a result, folks will have a fantastic spot to store anything they require as a result of this.
• It is a sturdy, commercial-grade component that can be installed. Tamper-resistant.
• It is a sturdy, commercial-grade device that may be installed. Tamper-resistant.
Finding the Right Large Porch Box
- To begin, choose if you require a box with a volume or a package size.
- Some people receive a large number of modest packages and must be able to accept each and every one of them.
- Other folks will occasionally receive a huge shipment and will want additional room to accommodate it.
- There’s also the question of how to use it.
- Some need a key or an access code, whilst others may simply have items dropped off in the style of the United States Postal Service.
- The price of large porch lockers varies based on their size and level of protection.
- Depending on the size and level of protection you want, the cost might range from less than a hundred dollars to about a thousand dollars.
- There’s also the matter of design, of course.
- It is possible that various designs will be more appealing for your setting if you are using your locker for home or business purposes.
- The Keter Package Delivery Box is the greatest overall extra-large parcel drop box available on the market right now, since it has an appealing, timeless appearance as well as the ability to accept goods without the need of a code or key.
- The RTS Home Accents Parcelwirx Premium Horizontal Delivery Drop Box is the greatest extra-large parcel dropbox for the money when it comes to value for money.
- It is constructed of durable materials and has a high-quality finish.
- The five alternatives listed above are all excellent possibilities, depending on your specific requirements….
- Selecting a porch locker box now will provide you with immediate peace of mind and will ensure that your shipments are properly safeguarded.
How to Create a DIY Parcel Drop Box
- If you’ve ever ordered something online, you’re probably aware that delivery can be difficult.
- Sure, the delivery company will leave the items on your porch—but will they still be there when you return home from your day job?
- It’s no secret that package theft has become a major problem, as thieves view boxes left on porches as an easy chance to steal someone else’s belongings.
- Using a safe lock box can assist to reduce the likelihood of theft.
- The following instructions will show you how to make a DIY parcel drop box to keep your shipments secure.
- now is the time to shop
- Don’t leave your things out in the open in this manner! So, what exactly are you hoping to accomplish by constructing a package drop box? According to our assessment, there are three primary objectives: Security. It goes without saying that this is at the top of the list, given the entire goal is to prevent theft. When it comes to ensuring that the drop box meets your demands, it must keep prospective burglars out until you return home. It needs to be durable enough to survive damage, and it needs to be fastened in such a way that criminals are unable to simply walk away with the entire thing.
- Aesthetics. You don’t want to display a large, unsightly box on your front door. Your neighbors may object to the sight of an unsightly box in front of your home, and you will become bored of seeing an unsightly box in front of your home. One of the most difficult aspects of designing and building your own solution is creating something that is both visually appealing and durable enough to be displayed on your doorstep with pride. The construction of a drop box that will be demolished in a year or two is completely pointless. Both the materials and the construction must be designed for long-term performance
- otherwise, the project will fail.
You can immediately sense the seriousness of the task when you look at the three objectives that have been created. It is essential that you design something that will keep your parcels secure, looks beautiful on the porch, and is made to last if you are going to be satisfied with the final outcome. Do you still want to take on the challenge? Let’s keep moving forward!
- The PARCELBIN package lock box is presented here for reference purposes only. The stages involved in designing and constructing your drop box will be broken down into a number of sub-parts. You’ll need to create your own blueprints ultimately, taking into consideration factors such as the amount of space you have available, the size of the goods you regularly have delivered, your budget for the work, and other factors. As a result of this part, we can provide you with a guidance on some of the most important aspects of making a valuable lock box: Make use of materials that are appropriate for the outdoors. This is a critical step if you want the box to last for many years to come. Even if it is going to be placed beneath a covered porch, it should be constructed of materials that are resistant to the elements. Although a roof will keep the box from being directly impacted by rain, there will still be moisture in the air at certain times of the year. If you choose materials that aren’t suited for outdoor use, the moisture will soak into the materials, and the state of your box will quickly degrade (optional). Your goods will need to be placed inside the box by the delivery person, so make sure they are easily accessible. Instead of a lockable door, you may try putting a slot at the top of the box to keep everything safe from prying eyes. If this is the case, you will need to make certain that packages can be easily placed in, but not removed from, the container. A design that is akin to a library drop-off hatch is one that is highly effective. Upon opening, a product is put into the holder, which prevents the space below from being accessible. When the hatch is closed, the package is dropped into the protected compartment, which is secured by a locking mechanism. As a side note, dropping shipments might result in property damage, and opening hatches could be less secure. You will need to build a lockable door in order to be able to access your shipments, regardless of which option you choose. Regardless of whether it is a key lock or a combination lock, you will be able to unlock it to receive your delivery as soon as you return to your house. For those who do not want to use the hatch design, a code or key may simply be supplied with the delivery business, allowing them to access the box for drop-offs as needed.
Some Drawbacks Of DIY
- As a point of comparison, the PARCELBIN package lock box is illustrated below. There are a number of procedures you will need to perform when you design and construct your drop box. Once you’ve determined how much space you have available, the size of the packages you regularly get, the money you have for the work and other factors, you’ll need to make your own ideas. The following sections will serve as a guide for you in terms of some of the most important aspects of making a valuable lock box: Consider using weather-resistant materials. The use of this key is critical if you want the box to last for many years. Even if it is going to be placed beneath a covered porch, it should be constructed of materials that are resistant to the elements outside. Although a roof will keep the box from being directly impacted by rain, there will still be moisture in the air at certain periods of the year. Materials that aren’t intended for outside use can absorb the moisture, causing the state of your box to quickly deteriorate
- an opening for putting products inside (optional). Your packages will need to be placed inside the box by the delivery person, so make sure they are easy to access. Instead of a lockable door, you may try adding a slot at the top of the box to keep everything safe and secure. It is necessary to make certain that packages can be readily placed in, but not removed out, of the container if this is the case A design that is comparable to a library drop-off hatch is one that is quite effective in practice. Upon opening, a package is put into the holder, which prevents the area below from being blocked. As soon as the hatch is closed, the package is dropped into the enclosed compartment, which is secured by a locking door Dropping goods, on the other hand, may cause damage, and hatches could become less secure. You will need to build a lockable door in order to be able to access your packages, regardless of which option you choose.. When you return home, you will be able to access the door to receive your delivery, regardless of whether the lock is a key lock or a combination lock. For those who do not want to use the hatch design, a code or key may simply be supplied with the delivery business so that they can get access to the box for drop-offs as needed.
While you may prefer to do things yourself in most of your attempts, developing a solution that is long-lasting, dependable, and safe may be a difficult undertaking. In order to keep your goods safe, it may be wise to look for a reliable alternative.
Consider The PARCELBIN
- When you choose a PARCELBIN instead of a DIY lock box, you can be assured that all of your worries about a DIY lock box will be handled.
- This industry-leading package drop box is constructed to a high level of quality, which helps to keep criminals from stealing your valuable products.
- In addition to its extremely solid and long-lasting construction, it is also aesthetically pleasing.
- You should have no problems getting clearance from your HOA.
- Furthermore, choosing a dependable prefabricated model will save you a significant amount of time and labor.
- PARCELBIN is a high-quality drop box that will keep your parcels secure until you come to pick them up from the drop box.
- And you won’t have to do a single thing yourself!
How to Make a DIY Package Drop Box
- We’re well into the Christmas season, and if you’re anything like us, you’ve most likely already begun purchasing gifts for your loved ones online (or expecting your own presents in the mail from faraway relatives).
- Unfortunately, however, it’s very simple for parcels to go missing when they’re left on a porch unattended—this has even occurred to members of our family!
- I had placed a gift on my nephew’s front porch for him, but when he returned home, the gift had vanished (and he lost other packages the same way that year).
- Porch pirates is a term used by my neighbors to describe these contemporary robbers.
- It was my intention not to let my nephew—or anybody else—go through that ordeal again, so I devised a method of securing parcels brought to any home’s front door.
- To keep your goods secure over the Christmas season, we’re putting together a package drop box with a locking mechanism today!
- It may be customized to fit whatever amount of space you have available on your porch, and you can even include a sign for the delivery person to flip after they’ve dropped off their package.
- Because the Christmas season is typically hectic, cross ″worrying about your shipments″ off of your to-do list as soon as possible.
Step 1: Design and determine needed measurements (or use ours)
- To begin, choose a location where you will store your parcel drop box.
- Take measurements of the available space, and then calculate the dimensions of your box appropriately.
- Our package drop box is designed to accommodate envelopes and a variety of box sizes with ease; however, if you wish to accommodate even more parcels, you may expand the height of the box.
- Our box, which measures 23 3/4″ wide by 35″ tall by 21″ deep, was custom-built for a specific location.
Step 2: Cut lumber and plywood
Once you’ve decided your dimensions, you may begin cutting your timber and plywood to fit your project. For our measurements, please refer to our helpful cutting guide.
Step 3: Assemble box frame
- Following that, construct the box frame using three-inch screws.
- The height of our box frame will be 34 1/4 inches.
- More than one screw will be used in each joint, so offset them and, before sinking another screw into the same joint, examine it and offset it in a different direction so the screws do not collide with one another.
- As the uprights, four 34″ two-by-twos should suffice.
- For the sides, four 17″ two-by-twos should enough.
- Construct two rectangles, then join them with three two-by-two pieces and one one-by-two piece each measuring 19 1/4″ in width.
- The one-by-two will be placed at the top of the box and positioned flat so that it will serve as the top front edge of the box.
Step 4: Add door divider to package drop box
- The package drop box will feature two doors: a smaller one at the top and a larger one at the bottom of the structure.
- This phase will require the usage of your remaining 19 1/4″ two-by-twos as well as the one-by-two of the same length.
- Installation Instructions: Install the one-by-twos parallel to the two-by-twos, but offset them by 3/4″.
- Screw these two combined parts into position at a location 7 1/4″ down from the crosspiece above, using two screws at each end to ensure that it is securely fastened in place.
- In order for the one-by-2 to hang below the two-by-2 on the rear side, it will be stepped down.
- This will split the front such that there will be an aperture above that is 7 1/4″ high and an opening below that is approximately 25″ high on either side.
Step 5: Add middle section to package drop box
- Install two 17-inch two-by-two sections front to back such that the tops of these pieces are 16 inches below the top of the box frame’s frame.
- Connect these sections together with a cross brace and place it 7″ from the inner of the front upright’s interior.
- In each end of the cross brace, drive screws into the cross brace, aligning them so that the cross brace revolves on the screws as if the screws were axles.
Step 6: Build internal slide shelf
- You will now construct a ramp to allow parcels to slide down once they have been positioned within the little door hole.
- The plywood measuring 13″ x 19″ and 1″ screws should be used to attach the plywood to both one by twos of the door divider piece in the step above and to the crosspiece near the middle of the box frame—but first, make sure to tilt the crosspiece to an angle that corresponds with the slope of the shelf.
Step 7: Screw on plywood sides and mount top piece
Screw the sides of the box into place with 1 1/4″ screws so that the top edges of the box frame are flush with the top of the box frame. The top piece should be attached to the box frame by screwing it in place. Make sure there is enough overhang in the rear to accommodate the thickness of the plywood you’re using.
Step 8: Mount upper door
Place the pull for the top door in the desired location, mark the location with a pencil, drill pilot holes for the mounting screws, and screw the pull into place. Attach two cabinet hinges to the one-by-two crosspiece at the top of the box frame, being sure to position them as far up as possible on the crosspiece. Attach the upper door to the opposite side of both hinges at this point.
Step 9: Mount lower, swinging door
- Remove an inch or two off the height of the lower door and cut a continuous hinge to match the length of the lower door.
- Mount one side of the hinge to the outer edge of the box frame using two screws on either side of the hinge.
- Hold the door in position, note the location, and fasten it with two screws to the wall.
- Take a moment to pause, inspect the alignment of the swinging door, and make any required adjustments.
- As soon as you’ve got it in the appropriate position, drill through the hinge wings and into the box frame and door with the remainder of the screws.
Step 10: Install catches
- To secure your package drop box, you can use a hasp and padlock, a keyed cabinet lock, or a range of other types of security measures.
- A magnetic child-safety cabinet lock was used, which means the bottom door cannot be opened visually and there is no handle to pull it with force.
- To unlock the latch, a magnetic ″key″ must be inserted into the lock.
- All you have to do is hold the ″key″ in the proper location on the door, and it will release and allow the door to open fully.
Step 11: Install bottom mounting plates
- Attaching your package drop box to either wood or concrete is an option, and depending on which technique you choose, you may want to prepare the mounting plates before securing them to the box frame to prevent them from falling off.
- When securing the two-by-four mounting plates that were constructed, use two screws at each ends of each board and put the boards into place crossways between the bottom framework of the box frame.
- Depending on the type of material used to construct your porch, the following are some alternatives for attaching your package drop box: (1) Attaching the mounting plate to the wood: Drill a lag screw through the top of the mounting plate and into the wood below it.
- (2) Attaching to concrete: Insert a concrete anchor into a hole in the concrete that has been drilled.
- Drill a hole in the mounting location large enough to take the threaded bolt end that will protrude from the concrete, and fix it with a washer and nut to secure it in place.
(3) Attaching the mounting plates to wood or concrete: Use a construction adhesive to attach the mounting plates to your deck, porch, steps, or other wooden or concrete structure.
Step 12: Attach the back
Finally, screw the rear piece of plywood into place, making sure that the top edge of the plywood is tucked up under the lid’s overhang.
Step 13: Paint or stain your drop box
- We painted our drop box to match the siding of its new house to give it a cohesive look.
- A two-sided ″empty″ and ″occupied″ sign may be attached to the top of the package drop box if you want the delivery person to notify you when they have dropped off an item for you.
- That’s all there is to it!
- Take pleasure in your new, one-of-a-kind package drop box, which will keep your packages secure and dry over the Christmas season and for the rest of the year to come.
- Makeover the remainder of your porch with a fresh coat of paint on your front door, some homemade wooden lanterns, or by putting up your Christmas lights..
17 DIY Parcel Drop Box Projects: Do It Yourself Easily
- A parcel dropbox is a convenient option to collect your package at a time that is convenient for you.
- When you get the delivery, it is placed in a lockable bottom box and kept there until you are ready to collect the gift from the box.
- I think it’s a really nice sculpture to put in front of your house, too.
- Your time and money can be saved by using the proper package drop box.
- Was it ever brought to your attention that you could make one for a fraction of the price?
We’ve outlined various options for you to consider below!I hope this post has been helpful in your search for the best parcel drop box.
1. How To Make A Parcel DIY Drop Off Box
A parcel dropbox is frequently a large job, especially if you want to make it a major project. Some drop boxes are as little as a loaf of bread in size. Initially, a huge wooden box with a concrete base will be used as a dropbox. Several layers of different materials are used to cover the top, which is protected by a plastic shell. The last layer is a velcro-adhesive sheet.
2. DIY Parcel Box Build
- This parcel drop box is secured with a lock, ensuring that your package is protected from thieves.
- Starting with securing a location for the package drop box, you’ll want to consider the following: Take a measurement of the available area and use that measurement to cut out the box’s foundation.
- You must have the exact dimensions of the box, which will allow you to cut the plywood and timber to the proper size after it has been built.
- It is now time to put everything back together once it has been chopped.
- First, attach the box frame with the 3-inch screws.
Next, build the lid.Each corner of the box necessitates the use of many screws.After that, attach the door divider to the wall.
3. DIY Package Drop Box
- A package dropbox has been incorporated inside this little house because it is constructed in such a manner that the package will fall into a basket within the small structure.
- Installed within a little home built of pallet wood, the delivery drop box is accessible from the outside.
- The modest home can be constructed on the property’s grounds.
- The drop box itself is composed entirely of repurposed lumber.
- Across the street from the dropbox inside the modest house where the parcel will be delivered, a large basket has been set.
4. How To Build A Parcel Drop Box
- Due to the way it is constructed, the item will fall into a basket inside the miniature home, which serves as an in-built package dropbox.
- Installed in a little home built of pallet wood, the parcel drop box is accessible from the street.
- The little home can be constructed on the property’s property line.
- Recycling of wood was used to construct the drop box.
- Across the street from the dropbox at the modest house where the parcel will be delivered, a large basket has been set.
5. DIY Parcel Drop Box For $55
- The dimensions of this parcel box are 16 inches by 18 inches by 33 inches.
- It will cost you $50 to make it in total.
- It is divided into two compartments: the top compartment, into which the item will be dumped, and the bottom compartment, into which the parcel will be picked up.
- The bottom compartment is secured with a padlock, ensuring the safety of your package.
- It is a wooden box with a wooden base and a wooden top that hangs from the ceiling.
Water-resistant wood (cedar), eye screws, rod, corner bracing, door hinges, hinge lock, waterproof padlock, drill, saw, plastic container, and a bike lock are among the materials used to construct the box.Other components include a bike lock.More information is available by clicking here.
6. DIY Package Drop Box
- Approximately 16x18x33 inches in size, this package box.
- $50 was spent on materials and labor to complete it.
- Each compartment has two compartments, the first of which will be used to drop the package and the second of which will be used to collect the package.
- The padlock on the bottom compartment ensures that your delivery is kept safe.
- An overhead top is suspended above a wooden box with a wooden foundation underneath it.
Water-resistant wood (cedar), eye screws, rod, corner bracing, door hinges, hinge lock, waterproof padlock, drill, saw, plastic container, and a bike lock are among the items needed to construct the box.Other materials utilized include a bike lock.additional info please visit website
7. DIY Parcel Drop Box
- You may make this little package drop box out of whatever sort of wood that you happen to have lying around.
- In this specific case, the box was constructed using scrap wood and marine ply.
- Cutting, box assembly, and painting are the three sets of actions that are included in this project.
- After you’ve completed the three activities, you’ll need to attach the handles and you’ll be ready to go.
- Listed below are some of the tools and supplies that will be needed for the project: screws, plywood siding, cabinet pulls, power drills and saws, bar clamps and hacksaws, white wood, and construction grade timber, to name a few.
More information is available by clicking here.
8. How To Create A DIY Parcel Drop Box
- This article provides a thorough examination of a do-it-yourself parcel drop box.
- What you’ll need, how to construct one, and the most significant disadvantage of using a parcel drop box are all covered.
- In order to construct this structure, you must seek for materials that are suited for outside settings.
- You’ll need a lockable door to keep the item safe, as well as an opening to drop the parcel off at your location.
9. DIY Simple Parcel Delivery Drop Box
- This simple parcel delivery drop box is what we might refer to as a smart box since it has electronic components.
- Because of the pin-locked door, it has a high level of security.
- It is a little box, and you may get the box from your local IKEA shop if you so choose.
- Place the box in a safe location and write the directions for how to access the box on the top of it to remind you where it is.
- Whenever there is no parcel inside the box, always leave the box unlocked.
10. How To Build A Package Drop Box
- Only three tools are required to construct this package drop box.
- The inventor has a design for the box, and all three of the tools are still in good condition.
- A circular saw, a jigsaw, and a drill are the instruments used.
- He began by sawing the lumber into pieces using a circular saw, which he then stacked.
- In order to ensure that the cuts are perpendicular, he guides the cut using a straight edge.
After that, he used deck screws to put together the box’s foundation.
11. Homemade Box Parcel
This salvaged wood parcel drop box was created by hand and is a great way to save money. Begin by chopping the wood into small pieces and then larger pieces. Get a package of metal hinges strips and cut them into small pieces to use as a template. Hinge strips and nails are used to join the pieces of wood together. It is quite simple and quick.
12. DIY Delivery Box
People are growing increasingly interested in constructing a delivery box out of scrap materials they have lying around since it makes the endeavor more affordable. This specific box is constructed of 2x4s with plywood covering the bottom and a roofing sheet covering the entire structure.
13. DIY Package Drop Box
- The construction of this package drop box is quite easy.
- It necessitates less time, effort, and financial investment.
- Despite the fact that a trimming list is required, the list is quite short.
- Here is a list of the items on the list: 6″ cedar pickets at 18″ sides and bottom, 2 pieces of 2.75″ x 23″ cedar pickets door frame, 14 pieces of 6″ cedar pickets at 24″ front and rear, and 14 pieces of 6″ cedar pickets at 24″ sides and bottom.
- More information is available by clicking here.
14. How To Make A Parcel Box From Pallets
Pallet wood is a resource that may be used for a variety of woodworking projects. It was constructed entirely of pallet wood, which lends it a rustic appearance. Pallet wood and rustic roofing sheets were also used in the construction of the door. The door of the box was held in place by two metal hinges, one on each end of the box. More information is available by clicking here.
15. How To Build A Large Package Shelter
- This article will show you how to construct a huge package drop box.
- Despite the fact that the box is not contained, it still appears to be of high quality.
- It is supported by a wooden foundation, on which the box frame is mounted.
- The wood pieces that cover the box frame are a nice touch.
- Three pieces of wood were fastened over the top of the box, and the roofing sheet was fastened to these pieces of wood.
There isn’t a door here.More information is available by clicking here.
16. DIY Porch Package Box
- In the course of a typical day, this parcel drop box can be mistaken for an outside porch.
- In addition to having a comfortable cushion on the top, it features a background that serves as the rear of the porch.
- The parcel dropbox is divided into five sections: the top lid, the bottom, the front, two sides, and the rear.
- Because of all of these components, it is advised that you use a cutting list.
- You can review the trimming list by clicking on the link provided below.
After you’ve cut all of the components according to the cutting list, it’s time to put the box together.More information is available by clicking here.
17. DIY Parcel Box
- The drop box is 18 inches by 18 inches by 21 inches in size.
- It is made of stainless steel and may be purchased for up to $15.
- It will take 8 hours until it is completed.
- A portion of the time is spent cutting, folding, and fastening aluminum panels to the box with stainless self-tapping screws, with the remainder spent cleaning up.
- The combination of the lock and the door makes it nearly hard for a criminal to gain entry to the box.
We have reached the conclusion of this article. I sincerely hope that was of assistance. Remember, if you apply your mind to anything, there is nothing you cannot do or construct. Thank you for visiting; if you have any concerns, please do not hesitate to contact us using the comment box below.
How to Make a DIY Package Drop Box
- If your home is anything like ours over the holidays, there is a continual stream of parcels coming in the weeks leading up to the holiday season, and they are frequently stacked high on the front porch when we get home.
- In addition to inviting theft, it has the potential to ruin Christmas morning surprises when that hard-to-find, must-have toy of the year comes in its original box for everyone to witness!
- We decided to build a package drop box to protect the packages from the elements, to eliminate the possibility of theft, and to keep all of the gifts that were arriving concealed away.
- This is a straightforward DIY project that anybody can complete by following the instructions.
- With the use of a circular saw, a drill, and a jig saw, I created an easy-to-assemble 3-tool package drop box that was a big hit during our Christmas mail delivery!
You Will Need:
- It’s likely that your home is similar to ours at this time of year, with a regular stream of parcels coming in advance of the holiday season, and a stack of packages awaiting us on the front porch when we get home. In addition to inviting theft, it has the potential to ruin Christmas morning surprises when that hard-to-find, must-have toy of the year comes in its original box for everyone to admire! For the sake of weather protection, removing the possibility of theft, and keeping all of the gifts that were arriving hidden away, we decided to build a package drop box. Anybody may follow the instructions and do this simple DIY project themselves. I created a 3-tool DIY package drop box out of a circular saw, a drill, and a jig saw, and it was a huge success for our holiday mail delivery!
- Step 1: Create miter cuts for the base of the structure.
- I used a speed square to ensure that the circle saw remained perpendicular to the area where I wanted to make my cuts, and I cut my 2×4 to construct the base of the drop box using the circular saw as well.
- I cut five twelve-inch fence boards and then fastened them to three cuts from two-by-fours with fifteen-eighth-inch deck screws.
- One board will overhang the rear, which can be easily trimmed with a circular saw once it has been screwed down.
- Step 2: Design the structure of the package drop box.
In order to guarantee that everything was perpendicular, I utilized my speed square and cut 2x4s to form the construction of the package drop box.I staged and constructed the drop box frame, which I then bolted together using 212 inch deck screws.I then repeated the process on the other side of the drop box.Once I had completed the two sides, I linked them together using a cross bracing piece and bolted the entire structure to the base of the structure.Step 3: Construct the Top ShelfBefore attaching the siding, I constructed the top shelf.When it came time to build the shelf, I cut and screwed fence board pieces across the top of the construction.
- Step 4: Install the Siding Pieces Building the siding pieces onto the structure’s sides required the use of 158″ deck screws.
- I measured my line with a straight fence board and cut the overhang piece off the building with a circular saw set to the proper depth with a straight fence board.
- Keep all of the cut pieces aside for use on the door frame.
- Step 5: Construct the DoorI constructed the door frame out of 212 inch deck screws that were toe nailed together and recessed into the front of the building, and then covered it with 512 inch wide fence board siding on the outside.
- I trimmed all of the siding pieces to the appropriate lengths and used the trimmed pieces to complete the front of the door frame.
- Step 6: Cover 2x4s with plywood to create a flush hardware mounting surface.
- I used fence board to make a flush mount for the hinges and lock mechanism on the front of the door, which I attached with screws.
- For a straight cut, I used a straight fence board.
- I adjusted the board as I cut it order to cover the two 2x4s in front of the fence board.
- The next step was to attach the hardware to the door frame.
- I used black 4-inch hinges from a home improvement store for this.
- I designed my door frame smaller than the aperture in order for the door to open and close without being obstructed by anything.
- I added a gate latch to the door, but you may use whatever hardware or locking system that you choose for this project.
In Step 8, I marked and cut 39-degree angles on the ends of two 2×4 pieces using my circular saw to form the peak of the trusses that would support the ceiling of the drop box.To construct the roof structure, I cut a part out of the bottom end of the 2×4 where the trusses would be attached to the home using my jigsaw, linked the two sections together, and then fastened the final trusses to the house with my screw gun.I went through this method twice more to produce two trusses.Step 9: Attach the fence boards to the roof.
A second time, I utilized fence planks to provide support to the roof, this time put in place using deck screws.I again used the circular saw to take down the overhang.Step 10: Construct the Back WallI cut fence planks to build the back wall of the drop box, which extended all the way to the ceiling and covered the cubby at the top of the drop box.When the boards were bolted into position, I used a circular saw and a previously cut board as a guide to cut all of the boards to the same length.Step 11: Finish the roof with tar sheet trim.
- I used a utility knife to cut red tar sheet to trim the roof of the parcel drop box, and then fastened it into place with red screws that matched the tar sheet.
- The fence planks will provide a stable covering for the roof, but the tar sheet provides a really great finished appearance for the drop box.
- Step 12: Prepare and Paint the Parcel Drop Box Upon completion of the roof, we applied two coats of exterior grade paint in colors that matched our home’s exterior, and when it had dried, we set up the drop box in the driveway to begin receiving our Christmas mail.
- Choose a color that complements your home’s exterior or trim, and then design your drop box in your preferred manner.
We are quite pleased with our DIY package drop box, and I am delighted to be able to share this straightforward but extremely helpful idea, which can be performed with with three tools.Anyone may follow the idea for the parcel drop box and make it their own by changing the size and design to suit their needs.Give yourself a break during the hectic Christmas package delivery season and be certain that your presents will be protected from the elements, theft, and prying eyes.Is it possible for you to construct a do-it-yourself solution for collecting your Christmas mail or packages?On Hometalk, you may share your project images and suggestions, or you can get inspiration for other basic construction projects like this one.
Simple Diy Parcel Drop Box
- Using miter cuts, construct a foundation.
- I used a speed square to ensure that the circular saw remained perpendicular to the area where I wanted to make my cuts, and I cut my 2×4 to form the base of the drop box with a circular saw as well.
- Fence boards were cut to 512 inches in length, and they were secured to three 2×4 cuts using deck screws that were 15/8 inch in diameter.
- One board will protrude from the rear; simply cut it with a circular saw once it has been screwed in place..
- Step 2: Design the structure of the package drop box In order to verify that everything was perpendicular, I utilized a speed square and cut 2x4s for the framework of the package drop box.
Building the drop box frame was a simple matter of setting up the pieces and attaching them using 212 inch deck screws.I then went back and did it all over on the other side.My next step was to link the two halves of the structure together using a cross bracing piece and screw it all the way down to the foundation.Step 3: Construct the Top ShelfI constructed the top shelf before attaching the siding.When it came time to build the shelf, I cut and screwed fence board pieces across the top of the framework.Siding Pieces are added in Step 4.
- I attached the siding pieces to the structure’s sides with 15-inch deck screws.
- The overhang piece was cut off the structure with a circular saw set to the proper depth, and I measured my line with a straight fence board to ensure a straight cut.
- Keep all of the cut pieces aside for use on the door frame.
- 5th Step: Construct the DoorI constructed the door frame out of 212 inch deck screws that were toe nailed together and recessed into the front of the building, and then covered it with 512 inch wide fence board siding.
- Using a circular saw, I cut all of the siding pieces to length and utilized the trimmed parts to finish up the front of the door.
- Fill in the 2x4s to create a flush hardware mount in Step 6.
- To place the hinges and lock mechanism on the front of the door, I cut pieces of fence board to fit flush with the surface.
- For a straight cut, I used a straight fence board.
- I adjusted the board as I cut so order to cover the two 2x4s in the front.
- The next step was to attach the hardware to the door frame.
- I used black 4-inch hinges from a local home improvement store.
- To ensure that the door can open and close without being obstructed, I designed my door frame narrower than the aperture.
To secure the door, I used a gate latch, but you could use whatever hardware or locking mechanism that you like.I measured and cut 39-degree angles on the ends of two 2×4 pieces with my circular saw to form the peaks of the trusses that support the drop box roof in Step 8: Construct Rooftop Trusses A segment of the 2×4 at the bottom end where the trusses would be attached to build the roof structure was cut out using a jigsaw, and I glued the two sections together before attaching the final trusses to form a frame for the roof.Two trusses were constructed using this method.Fence Boards are added to the roof in Step 9.
I utilized fence boards, this time fastened in place with deck screws, to provide stability to the roof, and I used a circular saw to shave away the overhang.10th Step: Construct a Rear WallI used fence planks to construct the back wall of the drop box, which extended all the way to the ceiling and enclosed the cubby at the top.When the boards were bolted into position, I used a circular saw and a previously cut board as a guide to cut the rest of the boards.Step 11: Finish the roof with tar sheet trim A tool knife was used to cut a piece of red tar sheet to fit over top of the parcel drop box’s roof, and matching red screws were used to secure it in place.The fence planks will provide a sturdy covering for the roof, but the tar sheet gives the drop box a polished appearance that is truly lovely to look at in person.
- Finish painting the Parcel Drop Box in Step 12.
- Upon completion of the roof, we applied two coats of exterior grade paint in colors that matched our home’s exterior, and when it had dried, we set up the drop box in the driveway to begin receiving our holiday mail.
- Decorate your drop box in your chosen style and in a color that complements your home or trim.
- We are quite pleased with our DIY package drop box, and I am delighted to be able to offer this straightforward but extremely helpful project, which can be performed with only three tools and is available for download here.
Following the blueprint for the parcel drop box and customizing it to the size and style desired is simple for everyone.Take the stress out of the holiday package delivery season and rest easy knowing that all of your presents will be protected from the elements, theft, and prying eyes.Having trouble collecting your Christmas mail or packages?Have you come up with a DIY solution to the problem?Hometalk is a great place to share your project images and suggestions, as well as discover inspiration for other basic construction projects like this.
They just push the lid closed and it’s locked.
- Simple parcel drop box that you may make yourself.
- More ideas about parcel drop box, drop box ideas, and parcel box may be found on Pinterest.
- This simple parcel delivery drop box is what we might refer to as a smart box since it has electronic components.
- The box’s floor is raised 3/4 of an inch above ground level to minimize moisture concerns below the box’s foundation.
- Packages as large as 13 x 20 x 18 inches can be dropped into the drop slot.
This box has the greatest volume of all of our 2018 choices, and it can accommodate shipments up to 25x 9.5x 23 inches.Trust me when I say that if you have a locked box to protect your delivery, you’ll wonder how you ever managed without one!Copper paint is used in this DIY mailbox makeover: As a result, we took our original, extremely simple, and straightforward package drop box design and instructed our designers to make it even more user-friendly.More ideas about parcel drop box, parcel box, and homemade box may be found on Pinterest.Some of the significant disadvantages to consider while contemplating the construction of your.I was weary of racing home to receive a delivered box or discovering that it had been stolen by a porch pirate.
- I needed a break.
- Simple parcel delivery drop box that you may make yourself.
- The package box, which costs $218, is also the most affordable choice.
- IKEA sells a little box for this purpose, and you may purchase the box from them.
- Create a structure for the package drop box.
- Our parcel drop boxes have been designed with extreme care to guarantee that they are both durable and of the highest construction quality available.
- This is the most convenient package drop box for the majority of individuals.
- All of these recipes are quite simple to prepare and will not cost you much money.
- Place the box in a safe location and write the directions for how to access the box on the top of it to remind you where it is.
- Architectural mailboxes with an elephantrunk parcel drop box in red, available at a discount.
- More crucially, it is capable of safely storing virtually any product.
- Fortunately for you, I have discovered 15 simple DIY mailboxes that will assist you to quickly improve the appearance of your home’s exterior.
- There is no need to perform any installation work, and there are no codes, pins, or combinations to be used by the parcel delivery personnel.
Australian letter and parcel box, Handybox, is capable of taking deliveries from any firm and is completely secure.The rts home accents parcelwirx premium horizontal delivery drop box is the greatest extra big parcel drop box for the money when it comes to value for money.It has a maximum capacity of 29.2cm x 18.5cm x 23.6cm for shipments with dimensions of 29.2cm x 23.6cm.As should be obvious by now, constructing your own parcel drop box is not a simple undertaking.
It’s really safe, it looks wonderful, and it can accommodate both large and little things.The p12 box, which is equipped with press-in locks, is used for single drops of bigger packages.There are a plethora of wonderful ideas when it comes to giving your mailbox a beautiful makeover, and we have a cool one to share with you that we think you will really adore.For those looking to create a whole new mailbox or simply redo their existing one, the following list of do-it-yourself projects is for you.More ideas about parcel drop box, parcel box, and package are available on Pinterest.
- The mailbox has been spray painted in copper all around, with the black stain on the post and the gorgeous flowers adding even more to the overall effect of the mailbox.
- The bench box is de