Measure the three parcel dimensions in inches. Add the measurements of the two smallest dimensions together and multiply by two. This is the girth of your package. Take the longest dimension and add this to the package girth. The result is the combined length and girth of your parcel.

– Determine the pallet dimensions in centimeters. For each dimension, measure at the longest point, rounding each measurement to the nearest whole number (e.g., 1.00 to 1.49 will be considered 1, – Multiply the pallet length by the width by the height. – For import and export shipments, divide the cubic size by 5,000 to determine the dimensional weight.

## How do you calculate package girth?

Example: 40 cm (Width) + 30 cm (Height) = 70 cm. 70 cm x 2 = 140 cm (Girth). 3. Now simply take the longest dimension and add this to the package girth. The result is the combined length and girth of your parcel.

## What is the girth of a parcel?

When couriers talk about the girth of a parcel, they are referring to the measurement around the middle of your package, this is the girth measurement. You might also call this the circumference. When booking a parcel delivery service, you may be asked for the combined length and girth of your package, so it’s useful to know what this is.

## How do you measure girth of a box?

Measuring Girth. Start by identifying the longest side of your package. The side perpendicular to the longest side is then measured for girth. If geometry isn’t your forte, picture a box as a skyscraper.

## What is the length and girth of a package?

For parcels, length is the measurement of the longest dimension and girth is the distance around the thickest part (perpendicular to the length).

## How do you measure girth for UPS?

Multiply the package length (longest side of the package) by the width by the height. The result is the cubic size in inches.

## How do you measure pp girth?

Run tape down front of body, through crotch and back up the same shoulder. Allow for curves of bust and abdomen. Measure comfortably over buttocks and into small of back. This gives you total girth measurement.

## How big a package will USPS ship?

The maximum size for most mailpieces is 108 inches in combined length and girth. USPS Retail Ground pieces may measure up to 130 inches in combined length and girth (but will be charged oversized prices). Regardless of the size of the mailpiece, the maximum mailable weight of any mailpiece is 70 pounds.

## What is girth of a package?

Girth is the distance around the thickest part of the remaining non-length sides and is measured in inches. For rectangular packages, Girth would be Height multiplied by two plus Width multiplied by two. For cylindrical packages, Girth would be the circumference of the cylinder.

## How do you measure a box for shipping?

How to Measure a Box

- Measure the length of the box first. This is the long side of the box on the side of the longest flap.
- Next, turn the box 90 degrees and measure the width, which is the side with the shorter flap.
- Last, measure the height of the package.

## How do you measure a poly mailer for shipping?

Product Information

- Envelopes/Mailers. Width (W) x Length (L) Measurement includes the seal and lip.
- Boxes. Length (L) x Width (W) x Height (H) Interior Dimensions.
- Side Gusseted Bags. Width (W) x Depth (D) x Length (L) A gusset is a triangle shaped fold on either side of a bag.
- Zipper Bags. Width (W) x Length (L)

## Does the size of the box matter when shipping USPS?

The smaller a box you use will, as a general rule of thumb, reduce your shipping costs. Our software is set to default to 1 cubic foot for Packages when no dimensions are entered. If you know your box is less than 1 cubic foot, select Packages. You don’t have to do anything different when shipping.

## How do you calculate package size?

To calculate dimensional (DIM) weight, multiply the length, width, and height of a package, using the longest point on each side. Then, divide the cubic size of the package in inches by the DIM divisor to calculate the dimensional weight in pounds.

## What is average girth size and does it really matter?

The reported preferred girth is 6 to 6.5 inches. Average is 4.9 inches, with the majority falling from 4.7 to 5.1 inches. To put that reported preferred girth in perspective, 6 inches is also the

## How to calculate girth measurements?

Calculate the length & girth of your parcel manually. To calculate the girth of a package, follow these guidelines: 1. Measure the three parcel dimensions in centimetres. Example: 50 cm (Length) x 40 cm (Width) x 30 cm (Height). 2. Add the measurements of the two smallest dimensions together. Multiply the result by two. This is the girth of

## What are the dimensions of a package?

– Soft items that bulge out of its box packaging – Deformable, loose packaging, for example: plastic bags with excess material. – Packaging with movable parts, for example: handles that pop out, floppy string handles, etc. – Packaging that is close to the threshold between fulfillment fee size tiers.

## Girth measurement

- When couriers speak to the girth of a parcel, they are referring to the measurement around the centre of your delivery; this is the girth measurement.
- If your package is larger than the girth measurement, it is considered overweight.
- This is referred to as the circumference in certain circles.
- When booking a parcel delivery service, you may be asked for the combined length and girth of your box, therefore it’s a good idea to know how big your package is in terms of both length and width.

## Length and Girth Calculator

Our Length and Girth Calculator, located below, allows you to swiftly and simply calculate the total length and girth of your shipment in seconds. Simply enter the dimensions of your package and we’ll take care of the math for you!

### Length & Girth Calculator

Dimensions (width) (cm) The length of a person’s hair (cm) a person’s height (cm)

## Calculating combined length and girth

You can quickly and simply determine the total length and girth of your parcel by using our Length and Girth Calculator, but to give you a better understanding of how length and girth are calculated, we’ve put up this straightforward guide:

### How to calculate girth

To determine the girth of your package, start by measuring the length (the longest side), width, and height of the package. The following is the formula for calculating girth: Width + Height x 2 Consider the following scenario: you have a box that dimensions 20cm x 10cm x 10cm. Ten plus ten equals twenty times two, which is the computation. The circumference would be 40cm.

### Length and girth

Once you know the girth of your parcel, it’s straightforward to determine the ultimate combined length and girth measurement. In order to get the combined length and girth of your parcel, use the following formula: Height + Width + Length Consequently, if the girth is 40cm and the length is 20cm, the total length and girth is 60cm, as shown below.

## Why is parcel length and girth important?

- Because many courier companies have a maximum girth + length restriction for specific services, you may be able to utilize the girth measurement in conjunction with the length when determining the cost of shipping your package.
- When it comes to the Large Parcel size, for example, the total length and girth must not exceed 300cm, according to the Royal Mail.
- Anything larger than this will have to be shipped through Parcelforce, and as a result, different shipping rates will be charged.

### Get a parcel quote

- You will not need to know the size of your package in order to obtain a quote using our courier quote tool. You may get a fast price by simply packaging your goods and entering the weight and measurements into our quote form. Help pages that may be of interest: How to calculate volumetric weight
- Weight and size restrictions for parcels
- Large parcel delivery services
- Long parcel delivery services
- Small package delivery services
- How to calculate volumetric weight

## How to Calculate Box Girth for USPS

- Considering shipping an unusually enormous package, such as a piece of secondhand machinery, or delivering a large box of wholesale products to an important customer?
- In any scenario, you will need to take measurements of the shipment in order to establish the shipping alternatives accessible to your company.
- When it comes to calculating shipping costs, the diameter of the box is critical.
- It will also determine the shipping categories a package will be assigned by the United States Postal Service based on the sum of its length and girth (USPS).

## Measuring Girth

- Begin by determining which side of your box is the longest.
- The girth of the object is measured on the side that is perpendicular to the longest side.
- If geometry isn’t your strong suit, think of a box as a skyscraper instead.
- Your long side of the building is the exterior tall edge of the structure.
- The girth measurement is the circumference (the total of all four sides) of the base of the ground level or top floor.

## Calculating for Shipment

The United States Postal Service (USPS) has set maximum package sizes.For regular shipments, the combined length of the longest side and the width of the girth may not exceed 108 inches in total dimension.The package’s combined length and girth can be increased to a total of 130 inches in length and girth by paying a nonmachinable extra on the parcel.Please keep in mind that many larger items are also heavier, and that weight restrictions are in effect.The maximum weight for a regular parcel is 25 pounds, while for a nonmachinable parcel, the maximum weight is 35 pounds.If, on the other hand, your company deals in books, the media mail parcel class permits you to transport packages weighing up to 70 pounds.

## Additional Parcel Services

Is it possible that your package just missed the target with the postal service?Also UPS and FedEx use the same length plus girth measuring technique to determine package size, and they both accept bigger shipments as well.UPS can transport items with a maximum length of 108 inches and a total length plus girth of 165 inches.Packages up to the same limit size and weight are handled by FedEx and UPS, which both impose a maximum weight of 150 pounds.A shipment that is larger than any of these dimensions would need to be transported by a freight shipping firm to be delivered.

## Click-N-Ship It

If your package meets the shipping requirements of the United States Postal Service, you can either purchase postage online through Click-N-Ship or take the package to any local post office for mailing.After launching Click-N-Ship, input your ZIP code as well as the destination ZIP code for the shipment.Click-N-Ship will next question you about the form of your box and instruct you to enter the package’s dimensions and weight into the system.All of the shipping options that are available, as well as the cost of postage, are displayed.After that, you have the option of purchasing postage and printing a mailing label.

## How to Calculate the Girth and Length of a Package?

The weight, length, and circumference of a box are all specified by many logistics businesses, and clients are asked to be as accurate as possible while delivering their packages to them.But how does one go about determining the circumference of a package?Check it out for yourself by continuing to read!Go to the following page: What is the circumference of a box?How do you determine the circumference of a box?What is the best way to measure the total length and girth of a cardboard box?

- The importance of calculating the girth of a package Several factors influence the shipping cost, including the destination nations, the weight of the package, the length of the package, and many more.
- Another aspect that will be considered when estimating the delivery cost is the package’s circumference.
- To put it another way, the girth is a measurement of the distance around a packaged item.

It is critical to remember that the length of the parcel is always the side of the package that is on the longest side!As a result, the girth of the package will be determined by measuring the width and height of the broadest parcel locations on the package.Some calculators can automatically calculate the price once you have entered all of the measurements, allowing you to avoid having to measure the package’s girth or length manually.

And here at Eurosender, we’ve made the procedure as simple as possible for you!You will be able to determine the shipping price immediately after entering the measurements of your shipment into our shipping dimensions calculator.Are you interested in learning more about how it works?Take a look at the link below!

## How to measure the girth of a box?

Every courier company has its own set of specifications for the size of a package’s circumference.Measure the width of a box accurately to prevent unwelcome outcomes such as receiving a premium, receiving a returned product, or even experiencing a failed pickup or delivery attempt.The following is the formula for calculating the circumference of a package: Step 1: Take three centimetre measurements of the box’s three dimensions.Examples include the following: 40 cm (length) x 30 cm (width) x 20 cm (height) Step 2: Make a list of all of the things you want to do.To calculate the package’s circumference, combine the width and height together and multiply the result by two.For example, 30 cm in width plus 20 cm in height equals 50 cm.

- The circumference is 50 cm multiplied by two to equal 100 cm.

### How to measure the combined length and girth of a box?

- Now that we know how to measure the girth of a box, we can calculate the total package size by adding the length and girth of the box together to get the total package size. Step 3: Make a list of all of the things you want to do. It is now necessary to add the girth of the package to the longest dimension of its longest side. Listed below is the formula for calculating the length and the circumference of a box, which is combined by utilizing the same example from earlier: Following on from the previous steps – The girth measured 100 centimeters. The length measured 40 centimeters. Total package dimension: 100 cm (girth) + 40 cm (length) = 140 cm (combined length and girth) (combined length and girth) Read more about Volumetric weight
- \s Tracking parcels
- \s Standard shipping service

#### Why is it important to calculate the girth of a package before shipping?

Every courier company is unique, and each one has its own set of needs.They must guarantee that the box you are sending will fit in the cars or on the sorting belts before they can proceed.For this reason, it is critical that the package girth is calculated appropriately.Furthermore, the couriers are pre-planning the transit routes depending on the amount of parcels and the addresses of the final destinations.In many circumstances, if you fail to accurately measure the package girth, you might expect fees, unsuccessful pickup or delivery, or a box being detained at the depot owing to location constraints or exceeding the maximum package limits set by the carrier.Having doubts about your ability to perform the measurement and computation of the package girth on your own?

- Don’t be concerned; we’ve got you covered!
- Talk to our professionals, and we will assist you through the process and provide you the most inexpensive shipping option adapted to your specifications!

## Package Girth Calculator

- In order to calculate the girth of a package or parcel, enter the two smallest dimensions of the package’s length, width, and height into the calculator. Calculators for freelance rates, square yards (Sy), cost per square foot, media mail costs, stretch film costs, container dwell time, and shipping costs per pound are all available.

## Girth Formula

- When calculating the circumference of a shipping package, the following formula is utilized. G is equal to (D1 + D2) * 2. D1 and D2 are the smallest and second smallest dimensions of the package, respectively, while G is the girth of the box.

The units for all 3 are commonly represented in inches, although they can be any units as long as they are consistent.

## Girth Definition

What is girth? When it comes to shipping and receiving, the term ″girth″ refers to the sum of a package’s two smallest dimensions multiplied by two. It is possible that the length and width are the smallest dimensions, in which case they would be employed in this computation.

## Example Problem

How to calculate girth?

- To begin, take measurements of the package’s length, breadth, and height. For the purposes of this example, these were measured at 20 inches, 10 inches, and 5 inches, respectively.
- After that, pick the two smallest measurements.
- The width and height are the smallest dimensions in this case, measuring 10 inches and 5 inches, respectively.
- Finally, determine the circumference.
- The following formula is used to calculate the girth: G = (D1 + D2) * 2G = (10 + 5) * 2G = 30
- G = (D1 + D2) * 2G = (10 + 5) * 2G = 10 + 5 * 2G = 30

## 201e Quick Service Guide

Quick Service Guide> 201e Quick Service Guide |

## Physical Standards for Commercial Parcels

Overview

Parcel Dimensions | ||

Length Girth Length plus girth | The longest side of the parcel. Measurement around the thickest part. Cannot exceed 108 inches (Parcel Select cannot exceed 130 inches). |

- Measuring the total length plus the circumference (201.7.0) In the case of packages, length is the measurement of the longest dimension, while girth is the measurement of the distance around the thickest portion (perpendicular to the length). The total length and circumference of any commercially paid mailpiece, with the exception of Parcel Select, may not exceed 108 inches in length and circumference. Parcel Select items measuring more than 108 inches in length and girth combined but not more than 130 inches in length and girth combined are mailable at the relevant oversized rate (253.1.0). Packages are classified by the Postal Service into three categories: machinable parcels, irregular parcels, and nonmachinable parcels. Parcels that can be machined (201.7.5) If you arrange your packages in such a way that they can be handled by Postal Service equipment, your mail is considered ″machinable.″ Machinable parcels must meet strict specifications in terms of size, shape, content, and weight in order to be considered. 6 ounces is the bare minimum weight (3.5 ounces for parcels prepared under 201.7.5.2). Maximum allowable weight: 25 lbs (35 pounds for Parcel Select and Parcel Return Service parcels that do not contain books and other printed matter). The First-Class Package Service — Commercial, United States Postal Service Marketing Mail, and Bound Printed Matter all have lower weight restrictions. Dimensions: The bare minimum is 6 inches long, 3 inches high, and 1/4 inch thick at its thickest point. A mailpiece that is exactly 1/4 inch thick is subject to the minimum height requirement of 3-1/2 inches.
- Maximum dimensions: 27 inches in length, 17 inches in height, and 17 inches in thickness

It is only if all of the packaging standards in 601, as well as the packaging of soft goods in paper or plastic bags, that printed matter can be machined.

\u005C | Machinable Parcels Minimum weight: 6 ounces (3.5 ounces for small lightweight parcels prepared under 201.7.5.2). Maximum weight: 25 pounds (35 pounds for Parcel Select and Parcel Return Service parcels that do not contain books and other printed matter). |

- Parcels that aren’t quite right (201.7.6) Ordinary parcels that do not meet the dimensional requirements of machinable parcels, as well as other parcels that cannot be processed by parcel sorters, include:Rolls and tubes up to 26 inches in length, as well as merchandise samples that have not been individually addressed.
- Unwrapped, paper-wrapped, or sleeve-wrapped articles that are not letter-size or flat-size (for example, catalogs and directories).
- Products packaged in envelopes that are not letter-size, flat-size, or machinable packages.

- Parcels that cannot be machined (201.7.7) Nonmachinable packages have dimensions that are more than any of the maximum dimensions for machinable parcels. Several high-density products, cartons carrying more than 24 ounces of liquid in one or more glass containers, cartons containing 1 gallon or more of liquid in metal or plastic containers, and items in 201.7.7 are included in this group as well. Commercial First-Class Package Delivery Service (201.8.3) The maximum weight is less than 16 ounces at the most. The maximum measurements are as follows: 22 inches in length, 18 inches in breadth, and 15 inches in depth. Those parcels that are oddly formed, such as rolls, tubes, and triangles
- those that are overweight
- and those that are oversize are subject to a fee.
- For parcels to be exempt from a surcharge, they must have a unique Intelligent Mail package barcode together with a postal routing code.

Please refer to Quick Service Guide 280, First-Class Package Service — Commercial Parcels, for further information.Printed Matter that has been bound (201.8.6) The maximum weight allowed is 15 pounds.To learn more about bound printed matter, consult Quick Service Guide 260b, Bound Printed Matter.Parcels are divided into two categories: nonmachinable and machinable.Mailing to the Media 70 pounds is the maximum weight.See Quick Service Guide 270b for information on machinable packages.

- See Section 275.6.3 for information on preparing irregular parcels.
- Postal Service to the Library 70 pounds is the maximum weight.
- Barcode discount: applicable for machinable shipments (50-piece minimum), shipped at Basic pricing.

See Quick Service Guide 270b for information on pricing, eligibility, postage payment, and letter preparation.Parcels of Marketing Mail from the United States Postal Service (201.8.4) The maximum weight is less than 16 ounces at the most.In all cases, except for parcels mailed as product samples, parcels using detached address labels (DAL), parcels with simplified addresses, or parcels prepared under an exemption under Section 3.4.2, all parcels mailed as USPS Marketing Mail must be labeled with the correct Intelligent Mail package barcode (IMpb).

Those packages that do not comply with the standards for the use of Intelligent Mail package barcodes will be subject to a nonbarcoded charge.Refer to the following Quick Service Guides: 240h USPS Marketing Mail Machinable Parcels 240i are a kind of USPS Marketing Mail.Parcels of irregular shapes and sizes sent by the United States Postal Service 240j Irregular Parcels Delivered by the USPS Marketing Mail Carrier Parcel Select (201.8.5) Parcel Select Destination (201.8.5) Parcel Select Entry packages are charged according to whether they are machinable or not.Nonmachinable shipments are subject to the nonmachinable fee that is currently in effect.For Parcel Select Ground, there is no nonmachinable cost.

Parcel Select Oversized Pricing: Pieces that measure more than 108 inches in combined length and girth, but not more than 130 inches in combined length and girth, are eligible for postal delivery at the relevant Parcel Select Oversized pricing rate.Those pieces that match any of the following conditions must be charged nonmachinable rates when they arrive at their final destination.

- A parcel measuring more than 27 inches in length, 17 inches in width, and 17 inches in height
- Parcels smaller than 6 inches in length, 1/4 inch thick, or 3 inches in height are prohibited.
- A shipment that weighs less than 6 ounces (unless in the case of 201.7.5.2) or more than 35 pounds is considered overweight.
- In a glass container, a parcel containing more than 24 ounces of liquid, and in a metal or plastic container, a parcel carrying 1 gallon or more of liquid
- A package that has been poorly wrapped or metal-banded
- It might be in the form of a can, roll, tube, wooden or metal box.
- Books, written content, or business forms weighing more than 25 pounds are not permitted.
- The smallest side of a high-density parcel weighing more than 15 pounds and exerting more than 60 pounds per square foot pressure is defined as follows:
- An unmachinable parcel is defined as a film case weighing more than 5 pounds or having strap-type closures, with the exception of any film case the USPS authorizes to be entered as a machinable parcel under 201.7.5 and to be identified by the words ″Machinable in United States Postal Service Equipment″ permanently attached as a nontransferable decal in the lower right corner of the case.
- Packages that have features (such as poor wrapping) that, if mechanical sortation is utilized, might cause damage to the contents of the mailpiece, other parcels, or postal gear

Examples of Dimensional Weight, Nonmachinable, and Oversized Price | ||

Priority Mail Express, Priority Mail, and Parcel Select Destination Entry and Ground Dimensional Weight for Rectangular Shaped Parcels. For dimensional weight for nonrectangular shaped parcels, see 213.1.5.2, 223.1.5.2, or 253.1.3.2. | Dimensional Weight: Yes In this example the dimensional weight for a package is 51 pounds. |

- Each measurement should be rounded out to the next full number (length = 21, height = 20, and width = 20), as follows:
- Multiply length by height and then this sum by width (21 x 20 x 20) Equals 8,400 cubic inches
- For dimensional weight, divide the figure by 166 and round up to the next whole integer if it is greater than 1,728 cubic inches (8,400/166 = 50.60). The weight of the dimensions is 51 pounds.

- Nonmachinable Prices for Parcel Selection and Destination Entry If the following conditions are met: length greater than 27 inches, height greater than 17 inches, width greater than 17 inches, maximum weight greater than 25 pounds (35 pounds for Parcel Select and Parcel Return Service parcels that do not contain books and other printed matter), or if the parcel meets any of the nonmachinable criteria listed on page three.

Parcel Select Destination Entry and Ground Oversized Price Nonmachinable Price:Yes Parcel Select Destination Entry and Ground Oversized Price If the aggregate length and girth of the animal is greater than 108 inches but not greater than 130 inches.

Oversized Price:Yes In this example, length and girth is 130 inches. |

## Minimum and Maximum Sizes

If a mailpiece is 1/4 inch thick or less, it must be rectangular and at least 3-1/2 inches high by 5 inches long in order to be accepted for mailing. All mailpieces must have a minimum thickness of 0.007 inches.

##### Maximum Size

The combined length and girth of most mailpieces cannot exceed 108 inches in total length and girth.The total length and girth of USPS Retail Ground components may be up to 130 inches in length and girth (but will be charged oversized prices).The maximum mailable weight of any mailpiece, regardless of its size, is 70 pounds, regardless of its composition.Some types of mail have lower weight restrictions than others.

##### TIPS

- What do you consider to be high? What is the length? When establishing whether your piece is a letter, a flat, or a package, the length is the most important factor to consider. The side that is perpendicular to the length is known as the height.
- What is 0.007 inches? What criteria do I use to evaluate this? As a rule of thumb, an index card is sufficient in thickness. If you’re still not sure, speak with a Mailpiece Design Analyst (MDA)) in your area. They have instruments for accurately measuring thickness and can tell you whether or not your mailpiece is sufficiently thick.

Mailpiece shape

## Intro to Packaging and Shipping

Measuring a shipping box may appear to be a simple ability, but we’ll go over the fundamentals today for anyone who is new to the process or for enterprises who are just getting started with product delivery.We’ll go through how to measure a box, how to calculate the cubic dimension of a box, and other common shipping information to keep in mind when packaging your goods and delivering it to a consumer.When it comes to packing and shipping boxes, it’s critical to understand how to correctly measure a box in order to obtain the most cost-effective shipping rates.In order to measure a box, there are a few procedures that can be followed that will make things easier for your company.Here’s everything you need to know about measuring a box.Is it better to measure the inside or outside dimensions?

- When you purchase a shipping box from WCP or another distributor, the box is measured from the inside dimensions.
- This is done so that you may be confident that your items will fit correctly.
- When you measure a box for shipping with a carrier such as UPS or FedEx, you will be measuring the box’s outer measurements.

When carriers use the outer measurements of your box, they may more properly determine the amount of space necessary for your delivery.

## How to Measure a Box

- First, take a measurement of the box’s length. That’s the long side of the box that’s on the other side of the longest flap
- Once you have done so, flip the box 90 degrees and measure its width on one of the sides with the shorter flap.
- Last but not least, take a measurement of the package’s height. When the flaps are closed, the length will be measured from top to bottom.

*Special note on measurements: the acceptable range is +/- 1/8″

## Dimensional Weight and Shipping Your Package

The majority of freight firms charge based on the dimensions weight of the box or the actual weight of the box, whichever is higher. They do this in order to maximize their profits, which is why it is critical for the shipper to have the appropriate-sized box for your product in order to avoid overspending on shipping costs.

## How to Calculate the Dimensional Weight

- Calculate the cubic size of the box by multiplying the length by the width by the height of the box.
- Take the cubic dimensions of the box and divide it by the shipping carrier’s divisor to get the total weight of the package.
- FedEx and UPS utilize a retail dimensional weight divisor of 139 for packages smaller than 1,728 cubic inches, whereas DHL and USPS use a dim factor of 166 for packages less than 1,728 cubic inches (or 1 cubic foot). For additional information, contact the carrier.

For shipping firms, charges are determined not only by the size of the box, but also by the location to which the cargo is being transported.Companies that ship packages will charge you for shipping based on the cubic volume of the package and the location of the shipment.For accurate shipping charges, the dimensional weight must be precise and should not be rounded in any manner.If you have any more queries or want assistance in locating the ideal box, please contact your local WCP team!————- On the 7th of December, 2021, an update was made.Originally published on November 11, 2019 Source:Source:

## All About Dimensional Weight Pricing

- What precisely is Dimensional Weight, and how does it differ from other types of weight? During shipping, the term ″Dimensional Weight″ refers to the amount of space a product takes up in a vehicle or on an airplane.
- Pricing based on Dimensional Weight is more expensive for huge items that weigh relatively little.
- In order to qualify for Dimensional Weight Pricing, your shipment must be greater than 1 Cubic Foot.
- Considering that the majority of e-commerce packages are smaller than 1 Cubic foot in size, they do not qualify for Dimensional Weight Pricing.

Allow me to explain Dimensional Weight Pricing in a nutshell.Consider the following scenario: there is a huge truck, and that vehicle is packed with 200 enormous boxes of pillows.Every one of those enormous boxes of pillows weighs only a few pounds, perhaps 3 or 4 pounds on average.Consider the following scenario: the same truck is now loaded with 200 boxes of shoes, each of which is a little box that weighs 3 or 4 pounds.This is the same vehicle.Due to their smaller size, the boxes of shoes take up only around 20% of the space of the boxes of pillows.

- Because UPS charges by weight alone, the boxes of shoes and the boxes of pillows would cost the same amount to ship by UPS.
- As a result, in the same size trailer, five times the number of boxes of shoes, or 1000 boxes, could be transported at the same time instead of the extremely large but very light 200 boxes of pillows, which would earn five times the income for the same truckload.
- Carriers have adopted a formula for determining the minimum shipping weight for a box larger than 1 Cubic Foot in size, known as the Dimensional Weight, in order to balance the disparity between size and weight.

Carriers then charge a higher rate for larger boxes that weigh less than 1 Cubic Foot in size.When it comes to determining Dimensional Weight rates for both USPS and UPS, we follow the USPS formula: The dimensions of a package are multiplied by three: length x width x height.Obtain the Dimensional Weight by dividing the value by 166 if it is greater than 1 Cubic Foot (1728 cubic inches).

It will be charged at the higher rate for the Dimensional Weight if it is higher than the regular rate for that particular package.Fortunately, our clever program automatically analyzes the dimensions with the weight to decide whether or not Dimensional Weight Pricing is required, so you won’t have to do anything but wait.Although one cubic foot appears to be a modest amount of space, it is actually extremely enormous.A cubic foot is equal to 12 cubes ″12″ x 12″ x 12″ In most cases, e-commerce boxes are not cubes, and any size box whose sides add up to 1 cubic foot, or 1728 cubic inches, or less is acceptable works OK.It measures 18″ x 16″ x 6″ and is a size you may be more familiar with ″…..

This is a standard package size for items sold on the internet.A cubic foot is equal to 1728 cubic inches (or exactly 1 cubic foot), which is calculated by multiplying the length, width, and height of this box together.Any package that is less than these dimensions is less than one cubic foot in volume and is therefore exempt from Dimensional Weight.Dimensional Weight may appear to be a daunting concept, but unless you are shipping large boxes that weigh very little, you shouldn’t be too concerned about it.

- As a result, if you ship pillows in large boxes, you might expect to pay a higher delivery price.

## How Will Dimensional Weight Pricing Affect My Business?

Shipments bigger than 1 Cubic Foot in volume but weighing less than 1 pound will incur higher expenses due to Dimensional Weight Pricing. Shippers that are well-versed in the art of shipping will discover ways to mitigate the consequences of Dimensional Weight Pricing. Here are a few ideas to get you started:

- Examine your items, as well as the packaging you use to send them. Would they be able to fit into a smaller container? As a general rule of thumb, the smaller the box you use, the less money you’ll spend on shipping fees.
- The default value for Packages when no dimensions are supplied in our program is one cubic foot by default.
- Choosing Packages is the best option if you know your package is less than 1 cubic foot. When it comes to shipping, you don’t have to do anything unusual.
- For boxes that are greater than 1 cubic foot in size, pick Large Package and enter the box’s measurements in the Box Dimensions section.
- Using our program, we will compare the size, weight, and distance to determine the rate that is necessary.
- Due to the use of Dimensional Weight Pricing, it will be a little more difficult to calculate delivery costs while offering free shipment.
- Free delivery does not exist in the real world.
- Costs associated with free delivery are either passed on to the customer through increased costs or borne by the seller as an inherent expense of doing business.
- It all boils down to the profit margin that you, as the seller, are comfortable with in your business.
- If you are selling a million pairs of shoes online, even a little profit margin might build up to a significant amount of money in your pocket.
- If, on the other hand, you are selling hundreds of handmade sweaters, a smaller profit margin might mean disaster for your business.
- Take a look at your previous sales records and figure out where your consumer base is located.
- If you are based in California and sell cold weather clothes to people in Maine, your shipping expenses may be prohibitively expensive, making it impossible to give both free delivery and a reasonable pricing to all of your customers.
- Yes, we understand that free delivery is anticipated these days, but we understand that it may not be possible for you.

The amount of any Dimensional Weight charges will be deducted from your postal account as an Adjustment if you send a parcel greater than 1 cubic foot without specifying the measurements.

## DIM Weight Calculation: How to Calculate Dimensional Weight Pricing

What do you hope to gain knowledge about? The dimensional weight of a shipment is a significant component in determining its pricing. Regardless of whether you ship orders directly or deal with a third-party logistics (3PL) partner, you will almost certainly come across this pricing strategy. Continue reading to find out more about dimensional weight and how it influences shipping costs.

## What is DIM pricing?

DIM pricing refers to shipping prices that take into account the dimensional weight (DIM) of a box when calculating the total cost of transporting an item.If the DIM weight is more than the actual weight of the item, the DIM weight is utilized to determine the price instead of the real weight of the item.Prior to 2015, major carriers used a straightforward formula to determine the price of transporting products.The usual elements that influenced the price of shipping were the weight of the item and the distance that the item had to travel to reach its destination.When it came to shipping, the more weight and distance were involved, the higher the cost was per pound.Major carriers, on the other hand, have recently began included a third component in their calculations: the size of the object that is being sent.

- The fact that you are delivering a relatively lightweight item in a massive package means that the massive box is taking up important storage space while in route.
- As a result, we now have DIM Pricing, which takes the amount of a shipment into consideration when determining pricing.

## What is dimensional weight?

Dimensional weight, also known as DIM weight, is a pricing mechanism used in commercial freight transfer, including courier and postal services.Dimensional weight is also known as DIM weight.The dimensional weight of a structure is calculated by multiplying the length times the width times the height.Because the amount of space available on a delivery vehicle is restricted, dimensional weight is used to estimate shipping prices by taking into consideration the density of the packages.Consequently, even if you have a little package, it may be worthwhile to perform DIM calculations.Freight companies such as the United States Postal Service, FedEx, and UPS determine shipping rates based on the larger of two numbers: the actual weight of the shipment or the calculated dimensional weight of the box.

- Whichever figure is higher is the weight that will be charged to you.

## DIM weight calculators by carrier

DIM weight is calculated differently by each airline. Below you’ll find the most up-to-date dimensional weight calculators for FedEx, UPS, and the United States Postal Service. Please keep in mind that if you are a ShipBob client, you may refer to our Help Center documentation by clicking here.

## How to calculate dimensional weight (DIM weight)?

Measure the length, breadth, and height of a package and add them together using the longest point on each side to compute its dimensional (DIM) weight.Then, multiply the cubic size of the box in inches by the DIM divisor to get the dimensional weight in pounds for the package.Note: For packages that are not square, you would take the longest measurement on each side and round it up to the next inch.

### Steps to calculate dimensional weight

- 1. Using the longest point on each side of the package, measure the length, breadth, and height of the package. These measures should take into account any bulges or malformed sides, as anomalies might result in additional handling costs if they are not taken into account during the initial calculations for dimensional weight and weight distribution. 2. When determining dimensional weight, the majority of shipping companies require that you round up to the next whole number in the calculation. 3. After that, multiply the package measurements by the number of cubic inches in the package’s volume. Example: If your package measures 30 inches by 12 inches by 12 inches, the volume of your box is the product of these three measurements multiplied by four: 4,320 cubic inches (inches cubic). Final, the cubic size of the package is divided by a dimension factor, also known as a DIM divisor, to obtain its volume. DIM divisors are numbers established by major freight companies, such as UPS and FedEx, to denote distance between two points. These values correspond to cubic inches per pound of weight in cubic inches. FedEx, for example, now uses a DIM divisor of 139 cubic inches per pound for both domestic and international shipments, which is the current standard. To achieve a dimensional weight of 31 pounds, divide 4,320 by 139, which is the result of our previous example. The following is an example of how a shipping service might charge for the product in this scenario: The freight carrier will charge for the dimensional weight of 31 pounds even if the actual weight of the package is less than 31 pounds (e.g., 29 pounds), because it is the greater number
- however, even if the actual weight of the package is more than 31 pounds (e.g., 33 pounds), dimensional weight pricing will be calculated on the actual weight, not the dimensional weight, because they charge for the greater number.

We hope that this post has provided you with some valuable insight into the realm of shipping expenses.If you don’t want to deal with the headaches and expenditures of self-fulfillment, you could benefit from the services of a third-party logistics provider (3PL).Our fulfillment services are priced as simply and straightforwardly as possible, with no hidden fees or unpleasant surprises when your bill arrives.We also negotiate and compare shipping rates among all major carriers.″ShipBob supplies a range of standard box sizes, but because some of our products have such unusual dimensions, some of our shipments were being sent out with a lot of empty space, resulting in higher shipping costs.″ Using our purchase history, ShipBob supplied us with an in-depth study that helped us determine which bespoke box sizes we could stock ourselves at ShipBob facilities in order to lower our expenditures.″ Team Waveform Lighting (Waveform Lighting) Would you want to learn more about how ShipBob can assist your company in fulfilling ecommerce orders throughout the world and managing inventory?

- Request a quote right now.

## Learn more

Read on to find out more about how teaming up with a contemporary ecommerce fulfillment firm may help you ship orders more strategically, as well as advice on how to choose the right fulfillment partner. ″How to Choose a Third-Party Logistics Provider for Your Ecommerce Business″ is available for download.

## Dimensional Weight FAQs

Read on to find out more about how teaming up with a contemporary ecommerce fulfillment firm may help you ship orders more strategically, as well as advice on how to choose the right fulfillment partner for your business. ″How to Select a Third-Party Logistics Provider for Your Ecommerce Business″ is available for download here.

### 1. When do the revised dimensional weight calculations become effective?

FedEx and UPS revised their dimensional weight guidelines in January of 2017 to reflect this adjustment.FedEx has reduced the dimensional weight divisor for domestic shipments from 166 to 139 in order to save costs.When shipping packages that are larger than one cubic foot in volume, UPS will apply a dimensional weight divisor of 139 to the package weight.If the package is less than one cubic foot in volume, UPS will divide the volume by 166.

### 2. What is volumetric weight and how is it calculated?

Volumetric weight is a phrase that can be used instead of dimensional weight.It is determined in the same way as DIM weight: by multiplying the length, width, and height of a package and then dividing the result by a DIM divisor to arrive at the dimensional weight in pounds When calculating transportation charges, freight companies take into account the greater weight difference between real weight and volumetric weight.

### 3. How does FedEx calculate dimensional weight?

FedEx determines dimensional weight for both domestic and international shipments by dividing the cubic size of a package by a DIM divisor of 139, which is the same for both domestic and international shipments. If the dimensional weight is more than the actual weight, FedEx will charge you for delivery based on the dimensional weight, which is the greater of the two.

### 4. How do you calculate dimensional weight in pounds?

Depending on the carrier and destination, dimensional weight in pounds can be estimated by multiplying the cubic size of an item in inches by a dimensional factor or DIM divisor, which is typically 139 or 166 in most cases (139 or 166 in other cases).

### 5. When do I need to think about dimensional weight?

When picking which boxes to transport your items in, it’s crucial to keep the dimensional weight in mind.Increasing the size of the boxes will result in increased DIM weights, which will result in higher shipping costs in the long run.While making sure products are shipped safely, it is important to choose the smallest box possible while yet leaving enough room for air fill, bubble wrap, and other types of dunnage if they are necessary.

## How do you measure the girth of a package?

- There will be constraints on the aggregate length and girth of any box you send when sending it through courier, regardless of whether it is domestic or international. This is referred to as the ‘Max Girth’ in some circles. What is the most accurate way to measure the circumference of a package? See the section below for useful hints and considerations when gauging the circumference of a package. They are in place to guarantee that your product is able to travel through the courier sorting conveyors and delivery trucks without being damaged. As a result, you will have a clearer understanding of whether or not your item will be subject to any special handling costs if it is either too large or too tiny to be handled by the usual sorting methods. What is the circumference of a package? Girth is defined as the measurement around something
- it is also known as circumference. As a result, it is the distance around an item, and it is used in shipping to assess how much it will cost to send a certain cargo. It is the linear conversion of a parcel’s dimension in inches or centimeters, which is used in shipping quotations. Each package has three dimensions: its length, its breadth, and its height
- we use these measurements to calculate the girth of the package. What is the best way to determine the circumference of a package? In the case of packages, length is the measurement of the longest dimension, while girth is the measurement of the distance around the thickest portion (perpendicular to the length). To demonstrate how girth is computed, let’s look at an example. In this example, we’ll use inches to measure the box, which dimensions 18″ x 10″ x 12″. Step 1: Measure the length (18 inches). This is the length of the package’s longest side, rounded to the closest half-inch. In this case, the distance is 18′. Step 2: Measure the circumference of your waist at 44 inches. Calculate the breadth and height by multiplying them by two. For example, 10″ x 2 = 20′
- 12″ x 2 = 24″
- 44″ equals the girth

Step 3: Take a measurement of the package. The length and girth of your package should be added together for a final measurement. In this example, you would multiply 18″ by 44″ to get 62″.

- Things to keep in mind: If the circumference of a package is less than 130 inches (330cm), there are no shipping expenses. You will be charged extra ″special handling″ fees if your parcel’s girth measurement is greater than 130 inches (330cm).
- The majority of courier companies will not take packages having a circumference greater than 165 inches (419cm)

What is the maximum girth that can be accommodated? See the chart below for the maximum dimensions and weights that may be shipped through Purolator, UPS, and FedEx.

MAXIMUM MEASUREMENTS & WEIGHTS ALLOWED | |||

Service | Purolator | UPS | FedEx |

Max Weight Int’l | 150lbs | 150lbs | 150lbs |

Max Weight Air | 150lbs | 150lbs | 150lbs |

Max Weight Ground | 150lbs | 150lbs | 150lbs |

Max Length & Size Int’l | 108in 165 Girth | 108in 165 Girth | 108in 130 Girth |

Max Length & Size Air | 96in 144 Girth | 108in 165 Girth | 108in 130 Girth |

Max Length & Size Ground | 108in 165 Girth | 108in 165 Girth | 108in 130 Girth |

## Calculate the parcel girth: use the Quicargo girth calculator!

The maximum permissible girth is what you think it is. For Purolator, UPS, and FedEx, the maximum measures and weights permitted are listed in the chart below.

## The girth of the parcel: why is this calculation important?

Different courier services have a restriction on the size of their packages, which they refer to as the maximum girth.This maximum girth refers to the combined maximum length and outline of your product that will be shipped.But why do these courier firms impose a size restriction on their packages?By imposing a maximum size on your item, you may rest assured that it will fit comfortably on the sorting belts and in the delivery vans.Quicargo makes use of a variety of courier providers, which results in a very large maximum girth overall.Quicargo makes it simple and quick to transport normal, non-standard, and big packages to their destinations worldwide.

## Calculate parcel girth: the calculation

Is it something you’ve ever wondered how to determine the circumference of a package?Rather than calculating the girth of the box separately, you combine the package’s measurements with its length to obtain the girth.This may be calculated manually, or it can be done quickly and efficiently with a calculator.The width and height of the package are multiplied by two in this equation.The resulting shape is referred to as the parcel’s outline.Then we multiply the outline by the length, and this is how we come up with the girth measurement.

## Girth calculations: example

You may also determine the circumference of your package on your own.The first step is to take measurements of the parcel you wish to send on all sides.Example: the length is forty centimetres, the breadth thirty centimetres, and the height twenty centimetres in length, width, and height.As an illustration, consider the parcel 40 cm in length, 30 cm in breadth, and 20 cm in height (height) The second stage is calculating the contour of the parcel’s boundaries.You may also use the calculator to rapidly input the length, height, and breadth of the object, or you can compute them manually.Add the package’s width and height together and multiply the total by two to arrive at this figure.

- In this example, you would combine 30 centimetres (width) with 20 centimetres (height) to get a total of 40 centimetres.
- This gives you a measurement of 50 cm.
- The completed shape measures 100 centimetres in length (50 cm x 2).

As an illustration, consider the parcel 30 cm in width plus 20 cm in height equals 50 cm.50 cm multiplied by two equals 100 cm (outline) To determine the ultimate girth of the parcel, multiply the length of the parcel by the width of the outline.You may achieve a size of 140 centimetres by multiplying 100 centimetres by 40 centimetres (long) in this manner.

As an illustration, consider the parcel In this case, 100 cm (outline) plus 40 cm (length) equals 140 cm (girth)

## Need to transport parcels? Rely on Quicargo!

Have you determined the circumference of your package(s)?The next step is to make arrangements for the appropriate delivery.Take advantage of the digital transportation platform provided by Quicargo.Sending packages is a breeze when you work with us: it takes just a few clicks to complete the process!Sign up right away and see for yourself the benefits of being a member.Furthermore, by choosing Quicargo, you are supporting a transportation sector that prioritizes sustainability and innovation.

- The use of data and technology allows us to connect your item with a (freight) truck that was already on its way to you in any case.
- There is no need for a new carrier to hit the road.
- This saves you both time and money, as well as reducing our collective CO2 emissions.

Win-win!

Standard parcel | Non-standard parcel | Oversized parcels* | |
---|---|---|---|

Length | 0 – 130 cm | 130 – 175 cm | 0 – 380 cm |

Weight | 0 – 20 kg | 20 – 31,5 kg | 30 – 70 kg |

Girth(= length + 2x width + 2x height) | Max. 300 cm | Max. 300 cm | Max. 700 cm |

*Extra-large packages will be available in the near future.

### Incidental and small volume freight

Would you want to utilize Quicargo for shipments that need to be delivered quickly and irregularly? After that, we recommend that you have a look at our spot market. Even for modest quantities, we can provide competitive pricing. Check it out for yourself!

### High volume and regular transport

Do you have regular shipping channels and more than ten shipments per month for which you require transport services? Afterwards, you should ask for an estimate for the contractual charges. Taking this approach can result in savings of up to an additional 20% in shipping expenses.

### These customers had already decided in 2020

### Frequently asked questions

What are the maximum dimensions and weight that can be accommodated?In order to do address deliveries, the maximum weight of a shipment is 31,5kg and the maximum length is 1.75 meters.If your cargo is going to a parcelshop, the maximum weight and length are 20 kilos and 1 meter, respectively.What is the maximum size of the object?For delivery to addresses, the maximum size is 3 meters, while for deliveries to parcelshops, the maximum size is 2,5 meters.You may use the following calculation to figure out how big your shipment should be: size is equal to the sum of the length, the breadth, and the height.

### What else can Quicargo help you with?

### Never wait for a quote again

Calculate the cost of your freight in real time.Pallets and Parcels that are too large The calculator will provide you with an approximate cost estimate that is reasonably accurate.According on your needs, the exact delivery fee may differ from the estimate.Sign up for FREE to find out how much your ultimate shipping cost will be.Cookies are used on our website to provide you with the best relevant experience possible by storing your choices and recognizing you when you return.By clicking ″Accept,″ you agree to the usage of ALL cookies on this website.

## Dimensional Weight Measurements

Obtain a real-time estimate of your freight costs Excessive Size of Pallet Parcels A pretty accurate cost estimate will be provided by the calculator.Based on your specific requirements, the ultimate delivery cost may vary.You can find out your ultimate delivery cost by signing up for FREE.The purpose of cookies is to provide you with the most relevant experience possible by storing your choices and recognizing you on subsequent visits to our website.Your permission to the usage of ALL cookies is indicated by your selecting ″Accept.″

## Dim Weight Calculator

Your DIM weighs a total of 0 pounds.

#### Understanding Dim Weight Calculations

It is possible to compute dimensional weight using the cubic volume of a cargo and dividing it by the carrier’s dim divisor, which is an agreed-upon, changeable factor that is used by all carriers in order to calculate dimensional weight.The billable weight of a package is calculated by multiplying the length, width, and height (in inches) together and then dividing the result by the dim divisor.This is the equivalent weight for which you are paid when shipping the product.You may be charged based on the actual weight of the dumbbell hand weights you ship if you ship them by ground shipment.The dim weight, not the actual weight, will be used to calculate the shipping charges for huge boxes of feathers, such as those used to transport a stuffed animal.Consider the following example: a box of feathers with dimensions of 20x20x10 inches could weigh 3 pounds, but the dim weight would be 25 pounds.

- The fact that this weight is larger than the real weight means that the dim weight will be utilized to determine delivery expenses.

## Length + Girth Measurement

Calculate the girth and length of a package based on the parcel specifications provided.Many shipping companies have restrictions on the maximum length and girth of each shipment that is shipped.They rely on a measurement of length plus girth to keep track of these constraints.These measures are important because they ensure that your shipments will fit within regular carrier and fulfillment center operations when they are transported from a storage site to their final destination.Our simple to use calculator can assist you in your planning and computations!

## Girth Calculator

## Length + Girth Calculator

## Understanding Length + Girth Parcel Measurement

When it comes to logistics, the measurement of each side of your parcel is referred delivered as a ″dimensional measurement.″ Every parcel has three measurements: its length, its breadth, and its height (in inches).The ″length″ of a measurement is always taken to be the longest measurement.1.Take the three package measurements in inches and convert them to millimeters.For instance, 20 inches (length) by 10 inches (width) by 10 inches (height) (Height).2.

- Add the measurements of the two smallest dimensions together and multiply the result by two to get the final result.
- For example, 10 inches in width plus 10 inches in height equals 20 inches.
- 20 inches multiplied by two equals 40 inches.

As a result, the circumference of your package is 40 inches.3.To obtain the Length and Girth calculations, simply pick the longest measurement and multiply it by the package girth to obtain the results.

The total length and girth of your package are represented by this result.For example, 20 inches in length plus 40 inches in circumference equals 60 inches (combined length and girth).

## How to Determine the Billable Weight of Your Pallet

The weight used to compute the rate is referred to as the billable weight.If the dimensional weight, actual weight, and minimum billable weight are all larger than one other, the billable weight is used.The 68kg minimum billable freight weight is the bare minimum.In order to estimate billable weight, perform the following calculations: Step 1: Calculate your exact weight.When it comes to actual weight, it is calculated by weighing all of the things on the pallet plus the weight of the pallet, which is rounded up to the nearest half kilogram.To find out how much weight you have, use a scale.

- Any fraction of a kilogram should be rounded up to the nearest half kilogram.

- Determine the dimensional weight in Step 2. pallet density, which is defined as the amount of space a pallet takes up in proportion to its actual weight, is represented by the dimensional weight of a pallet. All UPS international package services may be subject to dimensional weight restrictions. Fi