How To Package Cards For Psa?

Place all your items in between two slightly larger pieces cardboard. Hold the package together with rubber bands. Ensure that the rubber bands are not too tight. They should be just tight enough to hold the cardboard pieces together and prevent the items from falling out.
Please note that the PSA Online Submission Center is the only way to submit cards, tickets and packs to PSA. We no longer accept carbon copy triplicate forms. STEP 1

How do I pack my collectibles for PSA?

Two copies must be included in the package with your items, while the third is for your personal records. Properly packing your collectibles is critical to ensure that they arrive safely to PSA. Begin by placing each item into a flexible pouch such as those made by Card Saver.

How do I Send my PSA cards?

Seal the box, apply the shipping label, and also apply the Submission ID label that PSA will provide you. Drop the package off at your shipper of choice (use the shipping method you choose through the PSA website), and wait anxiously for your cards to be graded. Who to Send Your Card to (PSA Grading Address)

How should I store my PSA cards?

Doing so requires immense care, and may not be worth doing if you are concerned that you could damage the card in any way. PSA recommends storing each card in a flexible card pouch and then placing the card in a tougher, semi-rigid plastic sleeve ( which it conveniently sells on its eStore ).

Does PSA Put card in case?

They state that clearly on their website Be sure and pick up some penny sleeves and semi-rigid card holder to submit your cards in. PSA will not accept any hard acrylic snap cases, top loaders or screw-down holders. These work great to ensure your cards arrive safe and damage-free when shipping.

How much does it cost to send a card to PSA?

Card Grading Postage Fees

TOTAL DECLARED VALUE Over $50,000 call for rates
$0 – $100 $25,001 – $50,000
1 – 8 items $15.00 $78.30
9 – 20 items $18.00 $81.30
21 – 50 items $23.00 $84.30

How thick is a PSA graded card?

Keep Your Favorite Card’s Holders in Pristine Condition. 40 Microns Thick 2x’s Industry Standard.

Are patching cards worth grading?

Graded cards hold up much better over time than a standard raw card. Raw or poorly-protected cards can get lost or damaged over time, but grading them can help preserve their condition and value. Prospecting. It’s a great idea to get cards graded of some of your favorite rookies or prospects.

Can PSA graded cards be fake?

It also looks good when you obtain quite a number of these slabs. For others, PSA or BGS graded cards are much easier to flip to make a quick profit. The thing with graded cards, though, is that they can be faked by those with questionable intentions.

How do you package cards for Beckett grading?

Securely pack your items.

Wrap other items in bubble wrap and be sure that they are kept together in some manner so they are not scattered about the box when it is opened. Use plenty of packaging materials (bubble wrap, packing peanuts) to ensure the items do not move around inside the box.

Can you send slabbed cards to PSA?

Sending a slabbed BGS card to PSA for grading is called a ‘crossover’. You MUST list a minimum grade you are willing to accept in your order form. You will also have to list the BGS serial number that correlates to that specific card.

Can you ship to PSA in a bubble mailer?

I have shipped less than 10 cards to various companies in bubble mailers with no issues. Ive sent cards before in a size 0 bubble mailer before without issue. but that was only a few cards. 20-30 cards, would definitely do a box.

How long does it take for PSA to grade a card?

PSA is currently delayed with grading. They also do not grade cards in the order they were received which makes it much harder to predict when a specific order will come back. These are the approximate turnaround times as of March 2021. Approximately 3-4 weeks.

How do you ship a stack of cards?

If you’re using Card Savers, stack the entire group of cards you wish to ship and secure the outside of your stack with a sturdy support such as rigid cardboard or foam core board. Secure the supports with a rubber band, masking tape, or plastic wrap.

How do I pack my items for processing by PSA?

If an item arrives with a manufacturer’s seal/sticker, be advised that PSA will remove it for processing purposes. Place all your items in between two slightly larger pieces cardboard. Hold the package together with rubber bands. Ensure that the rubber bands are not too tight.

Why submit cards to PSA for grading?

There are many reasons to submit your cards for grading: protecting the cards; maximizing their value; and sharing your own hobby experience with other collectors on the PSA Set Registry to name just a few. But exactly how does one go about submitting cards to PSA?

How to Mail Your Cards in to PSA

An even cursory examination of the trading card hobby indicates the widespread acceptance of cards that have been graded by PSA.For a variety of reasons, you should submit your cards for grading, including safeguarding your cards, increasing their worth, and sharing your personal hobby experience with other collectors through the PSA Set Registry, to mention a few examples.The process of sending cards to PSA is, however, not straightforward.

Unfortunately, the process of having cards graded is not very complicated to understand.The steps in this article will have you submitting cards in no time at all.Due to COVID-19 limitations, we are skipping the ″show submissions″ procedure for the sake of this entry because industry exhibitions have been placed on pause for the time being.

Instead, we are focusing solely on online entries given directly to PSA, as detailed below.

Step 1

Please see PSAcard.com/OnllineSubmissionCenter for further information. In this section, you may register for a new account or log in if you already have an account with the site. To guide yourself through the right submission form procedure and how to make use of our numerous services, simply follow the basic instructions provided on the website.

Step 2

Once you have entered all of the relevant information, you should print three copies of your completed submission form for your records. It is necessary to include two copies in the package with your products, with the third copy being kept for your personal records.

Step 3

In order for your items to arrive safely to PSA, it is vital that they are properly packaged.Organize your items by placing them in a flexible pouch, such as those manufactured by Card Saver.Proper packaging materials, as well as other necessary goods, may be obtained through the PSA’s online shop.

Please do not ship any things that have been housed in hard acrylic snap cases or screwdown holders of any kind.Objects of this nature create considerable delays in the processing of your order and will not be reimbursed.

Step 4

When packing your products for shipping, be sure to pack them in the same order that they are mentioned on your submission form to ensure that they arrive safely (s).Items that are not received in the appropriate sequence will be returned unprocessed to the owner at their expense.In addition, please refrain from labeling individual cards by sticking stickers or writing on the outside of the Card Savers.

Thank you.

Step 5

Place all of your goods (in the matched-up sequence) between two slightly bigger pieces of cardboard, and fasten with rubber bands to prevent them from falling out. Make sure the rubber bands are just tight enough to hold the pieces in place, but not too tight that they squeak. When items are packed excessively tightly, they are more likely to be harmed.

Step 6

Filling bubble wrap or other packaging materials around your belongings will keep them safe.Place the goods in a strong cardboard box to protect them from damage.Make certain that they are packed in a way that prevents movement within the box and ensures that all products remain in one piece.

Make sure to include two copies of the confirmation page from the Online Submission Center with your submission (s).Make sure the outside of the box is completely sealed using packing tape.

Step 7

Your Submission ID packing label should be cut and attached to the outside of your box.Check to see that the barcode is entirely visible and that it is not obscured by any packing tape.The information you provide will allow us to notify you once the shipment has arrived at PSA.

You must return to your Online Submission Center Dashboard in order to establish a Multi-Submission ID packing label if you have numerous submissions in one box.This brings the procedure to a close!Isn’t it true that it was that simple?

You may check to see if PSA has received your submission(s) by utilizing the Package Tracker tool, which can be located in the footer of the PSAcard.com website.Following receipt of your package into the PSA system, you will be able to track the progress of your submission(s) at the following URL: www.PSAcard.com/MyAccount.

Posted by Todd Tobias

In addition to being a veteran collector, Todd Tobias is also a member of the PSA team. He is continuously on the lookout for rare lacrosse issues and autographed cards to add to his American Football League (1960-1969) collection. Johnny Robinson was inducted into the Pro Football Hall of Fame in the Class of 2019!

How to Get Cards Graded by PSA 2021 (The Defentive Guide)

  • If you have any questions or concerns about our PSA card grading guide, please contact us at [email protected] or send a direct message to the Gold Card Auctions Facebook page. In the sports card grading industry, PSA (short for Professional Sports Authenticator) is a well-known and respected name. Despite the controversies surrounding the company’s escalating fees, it provides a broad range of essential services, including: single card grading
  • unopened pack grading
  • autograph authenticity
  • price evaluations
  • and others.

For the sake of our investigation, we’re looking at how the PSA grades its playing cards. This method and its rewards will become more familiar to you as time goes on, and you will be better prepared to submit your own cards and packs to PSA for ratings and assessments. Compare PSA Grading vs SGC Grading vs BGS Grading for more information.

Is It Worth Getting Your Card Graded by PSA?

  • Generally speaking, if you feel you have a high-value card in your possession, it is worth your time and effort to submit the card for a PSA grade. The following benefits accrue from having the PSA seal of approval: The ability to verify that your card is genuine and in excellent working order
  • It increases the market value of your card.
  • The ability to submit your card into the PSA Set Registry is provided.
  • Authentication informs potential purchasers that your card is genuine.
  • Ensures that your card’s quality is measured by an approved standard
  • Makes it possible for your cards to compete with those of other vendors who have had similar cards graded by PSA.
  • This membership gives you access to the PSA storage case, which is one of the most effective methods to store and display your cards.

Do some research on the card you are contemplating getting graded before you make a decision (read: Should You Get Your Cards Graded).If a card is valuable enough and in excellent enough condition, obtaining the PSA seal of approval may be well worth the expense of grading and certification.It’s Well Worth Your Time to Read Following that, the best Pokemon Booster Boxes are discussed.

The Best Football Card Packs to Buy Must-Have Lamelo Ball Rookie Cards The Best Football Card Packs to Buy

PSA Grading Cost

  • As of March 2021, the prices for PSA grading services have risen. In light of the spike in trading card investment and popularity, as well as the sale of Collectors Universe, the corporation that owned PSA was projected to suffer a decline in revenue. The rate for all types of PSA grading services has more than doubled or almost doubled in recent years. This was a significant development, particularly for individuals who rely on the PSA to grade vast sets of their cards. Having saying that, the pricing remain as they are. When it comes to getting your card graded, the cost is determined by the Declared Value of your card. This is the amount of money you anticipate your card will be worth after it has been graded by the PSA. The following are the prices: Card prices range from $20 per card for cards valued at $499 or less, with a ten-card submission minimum, to $50 per card for cards valued at $499 or less (note that this price is only available to PSA Collectors Club members)
  • $100 per card for cards valued between $500 and $999
  • $150 per card for cards valued between $1,000 and $2,499
  • $300 per card for cards valued between $2,500 and $4,999
  • and $600 per card for cards valued between $5,000 and $999
  • and $100 per card for

Valuation of cards with a Declared Value of $10,000 or more qualify for PSA’s Premium grading choices, which are available only to members of the PSA. Based on the declared value of your card, these alternatives cost $1,000, $2,000, $3,000, $5,000, or $10,000, depending on the amount you choose.

How to Submit Your Card To PSA

  • The first step is to go to PSAcard.com and register. You’ll see a green circular button with the word ″Submit″ written on it in the upper righthand corner of the webpage (it’s hard to miss). Your browser will take you to a Sign-In screen when you click on the button. To access PSA, you’ll need to sign up for an account if you don’t already have one. Immediately following your sign-in, you’ll be prompted to fill out the following information: The sort of object you are sending (for example, a standard card, a giant card, packs, or other similar items)
  • The service you are asking (grade, autograph review, authenticity review, or reholder)
  • the date you are requesting the service
  • and
  • The Declared Value of the card(s) you are submitting is the sum of the following:
  • Each card that you are providing should be described in detail
  • Please provide shipping and billing information.

Having completed this step, you are now prepared to submit your card to the PSA for an official grade, or for any other service you want.

PSA Card Grading Locations

A PSA Dealer may assist you in preparing your card for grading and can also provide further assistance in person during the grading process.Please see our website to locate a location near you.Its headquarters are located at 10 Woodbridge Center Dr., Suite 701, Woodbridge, NJ 07095, and it employs around 100 people.

See also:  How Much Is A Roll Of Forever Stamps At The Post Office?

The phone number for PSA Grading is 1-800-325-1121.The new PSA Grading landing page may be accessed at the following address:to Please Read This Before Submitting Your Card.

When submitting cards for grading, there are several common causes of misunderstanding, according to PSA. Specifically, two notions may be of interest to you in order to ensure that the grading process runs as smoothly as possible:

  1. Minimum Grade (explainer from PSA)
  2. Declared Value (explainer from PSA)
  3. Minimum Grade (explainer from PSA)
  4. Minimum Grade (explainer from PSA)

These principles, like so many other things in life, are simple enough to comprehend when given the correct instruction. PSA’s explainers should be of great assistance in this situation.

Steps to Take Before Sending Your Card In

If you are mailing in your card(s), PSA requests that you include two copies of your completed submission form with each card you send in.Print three copies of the document: two for inclusion in the bundle and one for your personal keeping.You may also opt to use one of the ways for cleaning your cards that will not cause damage to the cards themselves.

Because it necessitates extreme caution, it may not be worth your time if you are afraid that you may inadvertently do any damage to the card.

How to Package Your Card

In order to protect each card, PSA suggests that it be placed in a flexible card pouch before being placed in a harder, semi-rigid plastic sleeve (which it conveniently sells on its eStore).It expressly indicates that you should not utilize screw-down or snap casings since doing so would cause the time it takes for you to acquire a grade to be delayed further.Assemble your cards by stacking them (inside their plastic wrappers) on top of one another.

Place a piece of cardboard at the bottom of the pile to protect it from damage.If possible, make the cardboard barrier a little larger than the size of your playing cards.The card at the top of the stack should match to the first item on your card submission form, as seen in the image below.

If your cards are not in correct working order, PSA retains the right to mail your things back to you without providing you with a refund for the shipping costs you have incurred.Place a second cardboard barrier on top of your stack to protect it.Ideally, at this stage, your stack should be surrounded by cardboard barriers on both the top and bottom sides.Rubber bands may be used to hold the cards in place by wrapping them around the stack.Make use of the Goldy Locks approach, which means not too tight and not too loose.Place your deck of cards in a cardboard box with bubble wrap, packing popcorn, or other materials that will keep the cards from moving around.

Don’t forget to send two paper copies of your submission form with your entry.Make sure to seal the box, add the shipping label, and also attach the Submission ID label that PSA will supply to the package.After dropping off the box at your preferred shipper (using the shipping option you choose on the PSA website), you’ll be able to sit back and wait for your cards to be graded.

Who to Send Your Card to (PSA Grading Address)

PSA is based in the Southern California region.You should use the mailing address and manner that corresponds to the official PSA submission address, which is stated below, at the risk of revealing information that is not particular to you.TOP WAYNE GRETZKY ROOKIE CARDS ARE IN THIS YEAR’S TREND.

The addresses and delivery methods shown on this page may change at any moment.International submissions may also necessitate the use of specialized delivery methods.When submitting your cards to PSA, make sure to include the most up-to-date and customized information possible.

How the Grading Process Generally Works / How Long It Takes

In most cases, the level of service that you choose will be determined by the worth of the cards that you submit. This will have an influence on the amount of time it takes to grade your card. PSA will send you an email to advise you that your card has been received. Following that, it will:

  1. You must enter your order into the company’s grading system database.
  2. Create unique order numbers for each of your business cards.
  3. Update your Orders page to include more information about your contributions, if needed.
  4. Notify you if there are any faults or problems with your order (if there are any problems with your order)
  5. Stick stickers to the back of each card, which will allow PSA (and you) to track your academic progress over time.
  6. Calculate an approximate delivery date for your purchase
  7. Investigate each of your cards to guarantee its accuracy, and then give you an email stating that each card has been investigated and found to be accurate
  8. Identify any mistakes or cards that are not eligible for grading and notify you of them
  9. Sort your cards according to their value
  10. Create an official PSA Lighthouse Label for each eligible card and attach it to the card.
  11. Place your card and Lighthouse Label in the PSA case that has been trademarked
  12. Check the correctness of your card and grade by going through it again.
  13. Confirm the shipping details for your return
  14. Please get your card returned to you.

There is no way to predict how long it will take to grade your card with any precision. There are a number of variables to consider. Once your card has been received by PSA, order updates will be the most reliable method of estimating when the grading process will be finished.

Criteria PSA Uses to Grade Your Card

  • Until defects are introduced into the game, your card is deemed perfect. The following are examples of flaws that might lower the grade of your card: the card being miscut
  • A flaw in the way your card is printed
  • a typographical error
  • A card that has been discolored
  • A card with frayed or distorted edges or corners
  • A card with flaws, sometimes known as markings, on the surface
  • The picture on a playing card is out of focus

Here are some of the key criteria that PSA utilizes to evaluate cards, including those that you may submit yourself.

How to get cards graded for free by PSA?

Contrary to common perception, PSA does not provide a free service for grading baseball cards. PSA Photograde, on the other hand, is a service that they provide. PSA Photograde is a free service that provides a visual tour of the PSA Grading Standards and how they apply to the user’s cards, allowing them to obtain a better grasp of the standards and how they apply to their cards.

PSA Grades Scale

PSA assigns grades to cards on a scale ranging from 1 to 10.Individual grades are as follows: 1 – Unsatisfactory (PR 1) 1.5 – Acceptable (FR 1.5) 2 – Very good (GOOD) 3 – Excellent in Every Way (VG 3) 4- Very Good-Excellent (out of 5) (VG-EX 4) 5 – Exceptional (EX 5) 6-Excellent-Mint condition (EX-MT 6) 7 – Almost Mint (NM 7) 8 – Near-Mint-Mint condition (NM-MT 8) Mint (number 9) (MINT 9) Gem Mint is at number 10 on the list (GEM-MT 10) It is reasonable to anticipate that the market value of your unique card will increase in proportion to your score.

Conclusion – You’re  Ready to Have Your Cards Graded

Regardless of whether or not you select PSA as your card grading service of choice, you now have all of the information you need to get the process underway.

PSA Card Packaging Guidelines

  • Home
  • Submission Center
  • Card Packaging

STEP 1

Place each item in a flexible protective pouch (for example, a Card Saver I®).Flexible pouches must be strong enough to allow us to remove the object from the bag without damaging it.It is recommended that you place your cards/tickets inside a soft card sleeve or mylar before inserting them into the Card Saver to ensure that they are properly protected.

Using top loaders, hard acrylic cases, or screw down holders is not recommended by the PSA.Submissions received in these sorts of cases will be subjected to processing delays, and the cases themselves will not be returned to you with your submission.

STEP 2

It is important to package the products for shipment in the same order as they are mentioned on your Online Submission Center confirmation page, so that they arrive at their destination in good condition.Items that are not submitted in the right sequence will result in a 5 percent service charge being applied to your purchase as well as a delay in the processing timeframe.Keep in mind that you should not put labels, stickers, or anything else on the outside of Card Savers.

If an item arrives with a manufacturer’s seal or sticker, please be aware that PSA will remove it in order to handle the item properly.

STEP 3

Place all of your stuff between two pieces of cardboard that are slightly bigger in size.Rubber bands are used to keep the package together.Check to see that the rubber bands are not too tightly wrapped around the wrists.

They should be just tight enough to retain the cardboard pieces together while also preventing the objects from falling out of the cardboard.WARNING: If the goods within are packed too tightly, they may become damaged.

STEP 4

Packing material, such as bubble wrap or other shipping/packing material, should be used to protect the contents.

STEP 5

Pack the things in a fresh, sturdy cardboard box and include the confirmation paperwork from the Online Submission Center with it.It is not acceptable to reuse outdated boxes.If you are using Styrofoam pellets to pack your products, be sure that the objects are maintained together in some way so that they do not become dispersed throughout the box when it is first opened.

Make certain that they are not crammed together too tightly.If something is handled incorrectly, it might cause damage.To properly seal all of the edges on the outside of the box, wrap it with colored packing tape or security tape.

Painting tape, Scotch tape, and other types of tape that have been previously used are not recommended.

STEP 6

Your Submission ID packing label should be cut and attached to the outside of your box.Check to see that the barcode is entirely visible and that it is not obscured by any packing tape.The information you provide will allow us to notify you once the shipment has arrived at PSA.

You must return to your Online Submission Center Dashboard in order to establish a Multi-Submission ID packing label if you have numerous submissions in one box.The shipping address may be found by clicking here.When receiving incoming parcels, PSA highly recommends that you acquire insurance on your collectibles through the courier service of your choosing.

If your shipment contains an item that has been improperly packaged, has been damaged in transit, or has signs of tampering, it may be returned to you.

Submissions 101: Packaging Guidelines

A series of ″Submissions 101″ films has been created by PSA in order to assist collectors with the filing of their card grading submissions.In this episode, titled ″Packing Guidelines,″ PSA Vice President Steve Sloan and Customer Service representative Carlos De La Torre discuss some helpful packaging guidelines to keep in mind while mailing your cards to PSA via the mail.To guarantee that your cards arrive in the same condition as they were when you packaged them, follow these simple procedures.

The first step is to avoid using either screw-down holders or top loaders when mailing your cards to the post office.The former necessitates an excessive amount of time for deconstruction, whilst the latter provides for an excessive amount of wiggle space, which increases the likelihood of the card edges being damaged during transit.As an alternative, please place your cards first inside of a cent sleeve before placing them into either a Card Saver 1 or 2 for storage.

STEP 2: Arrange them in the same sequence in which they appear on your submission form, and then submit it.Each card should be clearly labeled on the exterior of the card holder, and they should be arranged in the same order as they appear on the submission form.Please include your submission number as well as the line item that appears on your submission form on the label for your submission.STEP 3: The importance of proper packing cannot be overstated.Organize your cards by stacking them in the same order that they appear on the submission form, then placing them between two somewhat bigger pieces of cardboard.To keep everything together, wrap a rubber band around the cardboard pieces and tighten it down.

After that, cover the cardboard pieces with bubble wrap and secure them with tape to keep them from moving about.STEP 4: Take the bubble-wrapped cards and place them in a shipping box that is the suitable size for the number of cards.Additional paper and/or popcorn bits should be stuffed inside the box to prevent movement while it is being transported.Following that, secure the box with high-security packing tape around all of its corners, edges, and seams, and write your submission deadline on the exterior of the box (for example, ″10-day Submission″).The receiving and processing of your order will be sped up as a result of your action.

  1. STEP 5: After picking your level of service, ship your products to the relevant PSA address listed on the website (USPS, FedEx Express or FedEx Ground).
  2. By entering your tracking number into the PSA Package Tracker, you may see the current status of your package (login required).
  3. You can also contact PSA Customer Service at 1-800-325-1121 if you need assistance.
  4. Look for more instructive films from your friends at PSA, which will be posted on a regular basis.

Posted by Terry Melia

Terry Melia is a hobby veteran who has served in several PR and marketing roles for industry movers and shakers like The Upper Deck Company and SCP Auctions and is presently serving as PSA’s Public Relations Specialist.

PSA Card Packaging Guidelines

  • Home
  • Submission Center
  • Card Packaging

STEP 1

Place each item in a flexible protective pouch (for example, a Card Saver I®).Flexible pouches must be strong enough to allow us to remove the object from the bag without damaging it.It is recommended that you place your cards/tickets inside a soft card sleeve or mylar before inserting them into the Card Saver to ensure that they are properly protected.

Using top loaders, hard acrylic cases, or screw down holders is not recommended by the PSA.Submissions received in these sorts of cases will be subjected to processing delays, and the cases themselves will not be returned to you with your submission.

See also:  What Is Included In The Dish Heartland Package?

STEP 2

It is important to package the products for shipment in the same order as they are mentioned on your Online Submission Center confirmation page, so that they arrive at their destination in good condition.Items that are not submitted in the right sequence will result in a 5 percent service charge being applied to your purchase as well as a delay in the processing timeframe.Keep in mind that you should not put labels, stickers, or anything else on the outside of Card Savers.

If an item arrives with a manufacturer’s seal or sticker, please be aware that PSA will remove it in order to handle the item properly.

STEP 3

Place all of your stuff between two pieces of cardboard that are slightly bigger in size.Rubber bands are used to keep the package together.Check to see that the rubber bands are not too tightly wrapped around the wrists.

They should be just tight enough to retain the cardboard pieces together while also preventing the objects from falling out of the cardboard.WARNING: If the goods within are packed too tightly, they may become damaged.

STEP 4

Packing material, such as bubble wrap or other shipping/packing material, should be used to protect the contents.

STEP 5

Pack the things in a fresh, sturdy cardboard box and include the confirmation paperwork from the Online Submission Center with it.It is not acceptable to reuse outdated boxes.If you are using Styrofoam pellets to pack your products, be sure that the objects are maintained together in some way so that they do not become dispersed throughout the box when it is first opened.

Make certain that they are not crammed together too tightly.If something is handled incorrectly, it might cause damage.To properly seal all of the edges on the outside of the box, wrap it with colored packing tape or security tape.

Painting tape, Scotch tape, and other types of tape that have been previously used are not recommended.

STEP 6

Your Submission ID packing label should be cut and attached to the outside of your box.Check to see that the barcode is entirely visible and that it is not obscured by any packing tape.The information you provide will allow us to notify you once the shipment has arrived at PSA.

You must return to your Online Submission Center Dashboard in order to establish a Multi-Submission ID packing label if you have numerous submissions in one box.The shipping address may be found by clicking here.When receiving incoming parcels, PSA highly recommends that you acquire insurance on your collectibles through the courier service of your choosing.

If your shipment contains an item that has been improperly packaged, has been damaged in transit, or has signs of tampering, it may be returned to you.

New PSA Shipping and Handling Rates

Effective May 1, 2008, new PSA shipping and handling costs will be implemented. Our printed submission forms, as well as our online submission center, will have the most recent printed fees listed on them. If you have any questions about the new prices, you may reach out to customer care at 800-325-1121 for more assistance.

Card Grading Postage Fees

CHARTER OF POSTAGE AND HANDLING RATES IN THE UNITED STATES

TOTAL DECLARED VALUE Over $50,000 call for rates
  $0 – $100 $101 – $500 $501 – $1000 $1001 – $5000 $5001 – $10,000 $10,001 – $25,000 $25,001 – $50,000
1 – 8 items $15.00 $17.30 $19.50 $24.30 $30.30 $48.30 $78.30
9 – 20 items $18.00 $20.30 $22.50 $27.30 $33.30 $51.30 $81.30
21 – 50 items $23.00 $24.30 $25.50 $30.30 $36.30 $54.30 $84.30
51 – 99items $30.60 $31.60 $32.60 $36.40 $42.30 $60.30 $90.30
100+ See Below $10.80 + cost per item $12.10+ cost per item $13.30 + cost per item $18.10 + cost per item $24.10 + cost per item $42.10 + cost per item $72.10 + cost per item
Regular Size Cards =.19/card + Declared Value Checks-Autographs =.46/card + Declared Value Tall Boys =.26/card + Declared Value T3’s =.58/card + Declared Value Game Tickets =.32/card + Declared Value $25,001 = $42.10 + $1.20 per $1,000 over

RATE CHARTER FOR INTERNATIONAL POSTAGE AND HANDLING

CANADA EUROPE PACIFIC RIM (MEXICO INCLUDED)
1 -10 items $35.50 1 -10 items $39.75 1 -10 items $37.75
11 to 20 items $38.75 11 to 20 items $44.00 11 to 20 items $42.00
21 to 30 items $42.00 21 to 30 items $48.25 21 to 30 items $46.25
31 to 40 items $45.25 31 to 40 items $52.50 31 to 40 items $50.50
41 to 60 items $51.55 41 to 60 items $60.20 41 to 60 items $60.50
Over 60 – $.78 per item Over 60 – $.92 per item Over 60 – $.93 per item
  • PSA PACK GRADING DOMESTIC SHIPPING RATES (USPS REGISTERED MAIL) – International Shipments are not included in the domestic shipping rates. Add $13.00 to Total One to get $4.80 plus declared value charge (add $.95 for each subsequent pack)
  • 100 or more packs are $.86 each plus stated value fee
  • and 200 or more packs are $.86 each plus declared value fee.
DECLARED VALUE FEE
$0-$500 $501-$1,000 $1,001-$5,000 $5,001-$10,000 $10,001-$25,000 $25,001+
$12.10 $13.30 $18.10 $24.10 $42.10 $42.10 + $1.20 $1000 over

Superior Fit Sleeves for PSA Graded Card Slabs

Home > Graded Card Case Sleeves >
Alternative Views:
IMPORTANT: OVERSEAS CUSTOMERS PLEASE READNOTE: NO Refund or Exchange Policy, due to Customer ordering wrong items. Be sure to order exactly what you need. If in doubt of what size of Sleeves to order Please contact us & we will assist you. In the event you order wrong size we do not offer exchanges or refunds. BUT, in the event we “Superior Fit Innovations Ltd.” makes an error and sends you wrong items, exchanges or refunds will be in effect.
Store Hours for Sales Now 24/7Weekend Purchases will be Shippedthe following Wednesday.Occasionally we may Close on theWeekend. Orders will not Process
How about a Gift Certificate for the Card Collector on Your List HERE.Dealing with those Pesky Flap Peel Off Strips. See Tip HEREScroll Down The page to See Customer Reviews of this item.Check-Out OurReviews.
    Quantity in Stock:(Out of Stock) Product Code: PSA-0001
    These Clear View Sleeves Perfectly Fit PSA Graded Card Holders. Keep Your Favorite Card’s Holders in Pristine Condition. 40 Microns Thick. 2x’s Industry Standard. Demo Video Produced for our eBay Listing.
      0 of 0 people found the following review helpful:
      0 of 0 people found the following review helpful:
      0 of 0 people found the following review helpful:
      0 of 0 people found the following review helpful:
      0 of 0 people found the following review helpful:

    Should I Get My Cards Graded?

    ″Do you grade or do you not grade?″ This is a topic that many collectors have found themselves asking more and more frequently as the trading card industry has reached new heights in the year 2020.When it comes to their own personal collection, most collectors have a preference for either ungraded (″raw″) or graded cards, but many are unfamiliar with the process of sending cards out for grading themselves.Research, money, and patience will be required before you can submit your cards for grading, but the effort will be worth it if it results in a profit and peace of mind for you.

    Let’s take a look at some of the most significant advantages and disadvantages of having your trading cards graded.Why it’s important to get your cards rated Protecting Your Financial Assets Over time, graded cards outperform a regular raw card by a significant margin.In the event that you choose to make an investment in a player that you trust in, rating their cards is a fantastic method of protecting your investment over the long term.

    The quality and value of raw or poorly-protected cards might depreciate with time, but grading them can assist to maintain their condition and worth.Prospecting The thought of having some of your favorite rookies or prospects’ cards graded is a terrific one to consider.It may be quite profitable in the long run to have your player’s cards graded early on in their career if you believe they will go on to become a superstar later in their professional career.By the time the players reach their peak, you’ll already have graded copies of their cards in your possession, ready to sell with confidence to collectors.Increases the value of a thing.To put it another way, the higher the grade, the greater the sale!

    If you manage to pluck a low-numbered parallel of one of the game’s most popular players, you’ve done well.Getting it graded and having it come back with a 9.5 or 10 is an even better experience.When it comes to high-grade copies of specific cards, many buyers are ready to pay substantial premiums, giving potential for value creation if you have an eye for gem mint raw cards in excellent condition.There will be less guesswork.It is incredibly advantageous to grade a card since it gives you with an expert evaluation of its condition, which is extremely useful whether you wish to sell or keep the cards.

    1. With a certified card, buyers who are extremely picky about the quality of raw cards know precisely what they’re getting, sparing you the difficulties of condition-related return claims.
    2. It doesn’t matter if you have no plans to sell the card; getting it graded will assist you in determining its worth and authenticity for your personal collection.
    3. Protection at its best A graded slab is the most effective kind of protection for a playing card available.
    4. Due to their durability, you will not have to worry about the safety of the card within the slabs on a regular basis.
    5. However, while a scratched or chipped slab may have a negative impact on its value, graded slabs are extremely difficult to harm if they are handled, stored, and shipped with care.

    Authentication In the case of after-market signed cards from TTM or in-person signings, prominent grading firms can provide an additional level of assurance that the autograph on the card is genuine.The authenticity of old cards can also be a source of concern, and having them graded will confirm that they are neither counterfeit or changed in any way.Database of Certifications Available Online When your card is assessed, it is entered into the grading company’s database and given a unique certification number, which is unique to you.If your card is ever stolen, this certification number may be able to assist police in identifying your card, which may be especially useful for older cards or cards that are otherwise unnumbered.Reasons why you shouldn’t have your cards graded Flips in a jiffy If you want to make quick money, skip the grading process and sell your cards as-is.The trading card market grew at a faster rate than projected during the pandemic, and turnaround times at most major grading companies were far slower than anticipated.

    These turnaround times are still in flux today.Because of the volatility of the trading card market, it is possible that the value of your cards will fluctuate while they are going through the grading process.A large number of collectors have been waiting for their cards to be returned for more than six months while using the usual services of top grading agencies.

    If you’re planning to sell your card in the near future, think twice before sending it away for grading unless you’re using one of the services that offers the quickest turnaround time possible.It’s too expensive!However, while some grading businesses provide services at a low cost of as little as $10 per card, these low-cost services are associated with lengthier response times and specific maximum value limitations.

    Grading in bulk or utilizing more expensive grading services has significant upfront expenses, not to mention the opportunity costs connected with sending the cards out for grading and regrading.In addition to the grading fees itself, you must factor in the costs associated with delivering the cards to the grading firm in the first place, as well.Unless you have the chance to drop off the cards for grading in person, this fee will cover the cost of materials, shipping, and insurance for the package you send.Consequently, if you’re going to have your cards evaluated, you’d better be certain that they’re going to be worth the time and money spent.

    1. It’s impossible for them all to be perfect tens.
    2. Achieving superior grade levels on your cards can increase their worth; nevertheless, any grade lower than ″Gem Mint″ 9.5 or 10 on any recent cards can cause their value to decrease significantly.
    3. It is possible that a card that seems to be a Perfect 10 to the untrained eye nonetheless has defects, resulting in disappointment when the card is returned with a grade that is less than pristine.
    • Even the cliche that cards are gem mint when they are first pulled from the pack is not always true.
    • Consider getting a second opinion on the state of your cards before submitting them for grading.
    • This will help you develop your own eye for Gem Mint Tens.
    • Another danger that must be addressed is that your cards will be damaged or lost during the grading process, so be certain that they are shipped to the grading firm with the utmost care.
    • Storage Graded cards can be difficult to keep as compared to raw 3 1/2′′ x 2 1/2′′ cards, which can be easily stored in nine-pocket booklets and cardboard boxes, both of which are readily accessible.
    • To preserve all of their graded cards in the same place, some collectors may purchase bespoke boxes, containers, or even display cases.
    • However, these can be pricey and take up a significant amount of room in your house.
    • Low-Value Cards are those that have a low monetary value.
    • You should carefully analyze whether it is even viable to grade low-end cards based on recent sold listings and general demand for the card if you are thinking about doing so.
    • There are enough low-cost raw choices available for base and frequently manufactured cards that sellers would very certainly wind up losing money on the majority of the cards they sent out to be graded in many circumstances, especially with base cards.
    • One of a Kind Many people in the hobby have been debating whether or not one of ones is worth rating, and the discussion has been heated.
    • Some collectors believe that the only time you should ever get a one-of-a-kind graded is if you are 100 percent certain that you will receive a 10.
    • In the end, why go to the bother of rating an original if there isn’t another copy in better condition than yours to begin with?
    • On the other hand, grading can aid in establishing a card’s validity as a genuine one-of-a-kind.
    • We hope that this blog post has given you with some useful information on the advantages and disadvantages of grading your trading cards.
    • Always remember to ask yourself, ″Is this worth the risk?″ while considering rating your playing cards.

    Wishing you the best of luck!Several of the industry’s main grading companies, including as the PSA, BGS, and SGC, accept consignments of cards on their website.You may see the complete list of grading firms whose cards we accept for consignment by clicking on the following link.

    • Additionally, COMC provides a Condition Review service, in which two to three persons independently examine the physical object and assess its overall condition grade.
    • For additional information about COMC Condition Review, please visit COMC.com/grading.
    • a little about the author: Currently employed as a Senior Trading Card Specialist at COMC, Roman Tomashoff specializes in sports trading cards.
    • The Everett Daily Herald newspaper, where Roman had worked as a sports reporter, was his previous employer before joining COMC.
    • He’s a huge lover of baseball, football, and basketball, and he’s the happy father of two dogs.

    He’s also been collecting baseball cards for most of his life.Many Boston Red Sox, Washington Huskies, and New England Patriots cards are in his own collection, as well as a variety of others.

    PSA/BGS Slab Scam? 4 Best Tips To Spot A Fake Graded Card

    A graded card of your favorite athlete is a must-have for every serious collector who is serious about his or her hobby.For starters, it helps to maintain the card itself, allowing it to live longer.It also looks fantastic when you have a large number of these slabs to work with.

    Others find that graded cards such as PSA or BGS are much easier to flip in order to earn a quick profit.The problem with graded cards, on the other hand, is that they may be fabricated by people with questionable motives.Collectors who do not exercise adequate judgement or prudence will find themselves wasting their hard-earned money on items that are of less worth than they know.

    Some useful strategies for identifying these phony slabs are provided in the section below.

    Ask for closer images of the slab

    Nowadays, the majority of collectors choose to purchase their cards online, using sites such as eBay or Facebook.Due to the nature of this transaction, the possibility to physically see these graded cards is no longer an option.Nonetheless, for card collectors, the importance of conducting due diligence has never been greater than it is today.

    The very first thing that should be done is to request close-up pictures of the slab in question, which should be done immediately.Important factors to keep in mind while submitting this request are the label, the corners, and the actual surface of the graded card itself (see image below).The images that will be given to you by the buyer should clearly show these areas of the slab in its entirety.

    If this is done correctly, interested buyers will have the opportunity to remotely inspect the property before making a decision on whether or not to proceed with the purchase.

    Check the label

    One of the most efficient methods of identifying a fake slab is to examine the label in greater detail.A bright light and a label are the two most common methods used by PSA to determine the validity of its graded cards, according to the organization.Once this has been accomplished, the words on the label should be readable with the naked eye.

    If this is not the case, there is a possibility that the PSA slab is a fake.Which one do you think is the fake?(This is the number one reason why I no longer purchase old PSA graded card slabs, nor do I believe the comps on them.) It is necessary to have a fresh slab with a new grade.

    There are far too many excellent forgeries coming out of China and India.) pic.twitter.com/j7w2zGiyoY PSA10Collectibles (@Psa10Collector) is a Twitter account dedicated to collecting PSA10 cards.The date is June 7, 2021.An additional red sign that collectors should be on the lookout for is the length of the PSA certification label.In a post by Cardporn, there are multiple instances of supposed PSA graded cards with labels that don’t fit the top area of the slab, as well as other examples of such cards.If you come across this type of PSA slab, you must report it to the appropriate authorities immediately in order to avoid anybody from being defrauded.The patent number stamped on the bottom portion of BGS slabs should always be checked when purchasing a slab from BGS.

    It should have a period immediately following the first three letters.If this mark does not appear, or if there is no patent number on the slab in question, it is likely that it is a forgery.

    Inspect it personally

    • The best method to evaluate a PSA or BGS graded card is to personally handle it in your hand if you have the opportunity.
    • From there, you may take the information you’ve learned and apply it to the slab you’re considering purchasing.
    • Because of the latest criteria regarding social distance, it will not be possible to physically check on these graded cards at any time you want in the future.
    • If you are given the opportunity to do so, it is advisable to protect yourself by wearing a mask or dealing with someone who has been vaccinated for the purpose of safety.

    Ask assistance from someone credible

    • When confronted with a problem that cannot be resolved, the most practical option would be to enlist the assistance of someone who possesses the requisite knowledge and ability.
    • Finding someone who can assist you in distinguishing between a fake slab and a legitimate slab may be quite beneficial in this situation.
    • More often than not, a reputable collector who is capable of authenticating a graded card is right around the corner.
    • You may request leads on a variety of social media sites, and there is a good possibility that you will be able to interact with one of them.
    1. Once you’ve located this individual, you may present the card you wish to purchase and have it checked for any signs of tampering or counterfeiting.
    2. Authenticity may be determined in a variety of ways, and these are just a few of the methods that collectors might employ.
    3. Collectors can also ask their friends for recommendations or conduct more study online to find other solutions.
    4. The bottom message is that you must exercise caution while dealing with these graded cards in order to avoid losing money in the long run..

    PSA Grading Tips Tricks and Frequently Asked Questions

    • The most recent update was made on January 26th, 2022.
    • A lot of people have questions regarding card grading, therefore we decided to compile a list of the most often asked questions concerning card grading.
    • If you have any more queries, please do not hesitate to contact Wayne at [email protected]
    • When packaging my cards, what sort of holders should I use is a common question.
    1. A1.
    2. The PSA recommends semi-rigid holders measuring 3″ by 4 1/2″ in size.
    3. We have utilized the Ultra Pro, BCW, and Cardboard Gold brands, and have found them to be of great quality in all instances.
    4. Q2.
    5. I’m having trouble finding semi-rigid holders of the proper size.

    What should I do in this situation?A2.We will take cards in any type of holder and will move your cards to semi-rigid holders for you at no additional charge.

    • Q3.
    • I have cards from a variety of service levels that I need to submit.
    • What am I supposed to do?
    • A3.
    • You may submit cards from all various years on a single form per service level for Economy service, which is faster and more convenient (Economy, Regular, Express, etc.).
    • Q4.

    Is there a limit to the number of cards I can submit on each service level?Is there a minimum or maximum number of cards I may submit?The answer is no, you may submit one card at a time, or as many cards as you like.If PSA decides to boost their pricing, what will happen?A5.We will always have the most up-to-date price information available in the submission form on our website.

    Once you have submitted your cards, you are committed to this price regardless of whether or not the PSA price increases.Customers are encouraged to drop in cards on a regular basis.Q6.When do I have to pay for the grading I received?A6.You do not have to pay until you pick up your cards from the store.

    As a result, your money is not locked down for months at a time.QUESTION 7: How can I find out the status of my order?A7.We provide an online status check, which allows you to see the progress of your orders.This is updated many times every day, so you can be confident that the information included therein is up to date.

    1. Q8.
    2. When will my cards be finished?
    3. How long will it take?
    4. A8.
    5. The PSA is presently experiencing a grading backlog.

    It is also important to note that they do not grade cards in the order in which they are received, which makes it much more difficult to forecast when a certain order will be returned.As of March 2021, these are the approximate turnaround timeframes for your order.

    Service Level Current Turnaround Time (door to door)
    Walk Through Approximately 2 weeks
    Super Express Approximately 2 weeks
    Express Approximately 3-4 weeks.
    Regular Approximately 2-3 months.
    Economy Approximately 4-6 months.
    Value Service suspended by PSA as of March 30, 2021
    • Q9.
    • I’ve seen advertisements claiming that my cards will be returned more quickly.
    • Is that correct?
    • A9.
    1. No, it is not.
    2. We submit cards on a weekly basis, which prevents us from hoarding them and delaying the start of the grading process.
    3. We are an authorized PSA dealer, which means that we obtain turnaround times that are far faster than the general public.
    4. Anyone who claims to have a unique offer at PSA in addition to this is not being truthful about their situation.
    5. If I have a basketball or hockey card from the 2017-18 season, which service level should it be assigned to?

    Q10.A10.This would be considered a 2017 playing card.

    • It should be included in the 1972-2017 time frame.
    • Q11: Can I have my Pokemon, Magic, or Yu-gi-oh cards graded?
    • Q12: Can I have my Pokemon, Magic, or Yu-gi-oh cards graded?
    • A11.
    • Yes, they are able to be graded.
    • Q12.

    What if I have a card that has been graded by another grading company (BGS, SGC, or another)?What is the process for getting it graded by PSA?A12.There are two possibilities available to you.First and foremost, break the case card and submit it with the rest of your other cards for consideration.Second, leave it in the present case and submit it for crossover service, with or without a minimum grade requirement, if applicable.

    For example, if you have a card that has been graded BGS 9, you can put it in the BGS 9 holder and submit it.It is possible to request a minimum grade of a 9, and the card will be returned in a PSA 9 or PSA 10 holder if it satisfies that standard.If this is not the case, the item will be returned in its original BGS 9 holder.No matter whether or not your card has been transferred over to a PSA holder, you can submit your submission at any service level and pay the grading price.Update: Crossovers are now being accepted at the Economy and higher levels of PSA.Q13.

    I have a PSA case that has been damaged.Is it possible to get the card recased?A13.Yes, provided that the card is in good condition.The fee is $30 for cards with a value of up to $5000 and $40 for cards with a value of more than $5000 (plus applicable taxes) (or cards you want back faster).

    1. Q14.
    2. I received a card that had been labeled incorrectly.
    3. Is it possible to repair this?
    4. Fill out a form and indicate that the card was labeled incorrectly, if the answer is affirmative.
    5. There is no fee associated with this service.

    Q15.I have an autographed baseball card that I received in person and would like it graded.Will PSA take this step?

    A15.Yes, you can submit signed cards at any service level that is currently offered.Please submit your work using our usual submission form, but be sure to select one of the service options that includes autograph authentication.I’m not sure what I should write down for the declared value of my card, so I’ll ask you.A16.

    This is the exact amount for which you would like your credit card to be covered.However, three cheap cards (out of tens of thousands) were damaged while being put into cases by PSA, and we have never had a card lost in the process.In certain instances, the purchaser received the full amount of the gift card refunded.

    Q17.What is an upcharge and how does it work?A17.If you declare the value of a card to be $1000 and submit it on the Economy service (which has a maximum value of $1000 per card) and it comes back as a PSA 10 with a value of $2000, you will be charged for the card at the $2000 service level (currently $175), which is the highest service level available.To put it another way, you now have a $2000 card instead of the $1000 card you were expecting, thus the additional money was well worth it in the end.What is the benefit of grading my playing cards with you rather than with myself or someone else?

    Q18.A18.The following are some reasons: 1.We are frequently less expensive if you are submitting less than 100 cards at one time.2.We will take care of all of the packaging, documentation, and shipment for you.

    3.You can drop off and pick up your cards at the shop on any day of the week except Sunday.You won’t have to be concerned about mailing your cards to someone.We do accept cards via mail if you would prefer to ship your cards to us or if you do not live in the immediate vicinity of our store.In addition, we are a PSA-authorized dealer.

    We mail your cards directly to PSA, rather than through a third-party intermediary.5.You may track the progress of your order on the internet.

    1. There is no need to contact your submitter through phone, email, or text to find out where your cards are.
    2. Q19: How do I know I can put my trust in you?
    3. What is the best way to ensure that I will receive my cards back?
    • A19.
    • Since 2001, we have delivered tens of thousands of cards to PSA without encountering a problem.
    • We will provide you with a copy of your submission form and urge you to photograph your cards, write down serial numbers, and do whatever else you feel like doing to make yourself more comfortable during the process.
    • Why is PSA no longer providing the Value level of service, and what does this entail for customers?
    • The Economy and higher tiers of service are the only ones available as of January 26th, according to PSA

Leave a Reply

Your email address will not be published.